Starter don't work,.....bike runs.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RHensleyTx

    #1

    Starter don't work,.....bike runs.

    On a 1982 850GL, 12 volts to starter. but starter doesn't turn. Is the starter chasis "ground" ? (only 1 wire going to starter)
  • Guest

    #2
    Can you get the starter to move by jumping the solenoid?

    Comment

    • StinkiestBink

      #3
      also check here

      Comment

      • Longimanus

        #4
        Had the same problem. Ran a ground directly from the screw where the solenoid is attached to the frame to the battery ground pole. Fixed it right away.

        Comment

        Working...