Need mechanic for GS650G

[GSNubie]

Hi...bike looks to be in good shape, but I would like to get it to a mechanic to give it a once over before I begin to ride (First time rider). I am aware of a fuel leak (from the carbs?) possibly because I am not sure how to shut off the gas! Did I mention I am a newbie at this? :-D I am in southern California (Mission Viejo) and just would like someone to give me an honest opinion of this bike.
Thanks!

[Guest]

I got lucky and found out that the guy who owns the bar I shoot pool for owns a chopper shop...he looked it over before I got it inspected and told me what I needed to get the sticker. Start asking some of you friends...you'll be suprised at who is in to bikes and can help.

Welcome to the resource!

[SqDancerLynn1]

Stock petcock does not have an off, It is vacuum operated. The carbs usually leak because they need cleaning or the needle seat O ring is bad

[GSNubie]

Thanks for the info on the petcock. I don't want to get taken to the cleaners for repairs...how much should I expect to pay to clean/fix the carbs? Do you have a ballpark of how much it should cost for someone just to "look" over the bike, clean the carbs, and give me the "OK...it's safe" stamp of approval?

[jimcor]

Carb cleaning is an expensive job if you have it done. Be prepared for the shock. Peruse this site for some ballpark figures:

http://www.motorcyclecarbs.com/

Shops, prices, and quality of service vary widely. Look here for a how to and consider doing it yourself:

http://www.thegsresources.com/gs_carbrebuild.htm

[salty_monk]

TPO of my bike paid $135. GS 1000G. I can give you the guys phone number if interested. Not used him myself. Think he's just a one man band.

I'm in Redondo Beach. Not a million miles away.

Dan