quick!!!

[justmount1]

i can't get pilot jet out. unscrewed it but it will not come out someone please let me know what to do. i want to get atleast one carb done tonight

[Guest]

Spray carb cleaner in it and let it sit. It should come out. Also spray carb cleaner into the main jet and block where the needle jet enters and that might force it out.

[justmount1]

thank you chef i finally decided to take a straight poker and pound in a little and pull it out. but there was no oring on it?

[Billy Ricks]

thank you chef i finally decided to take a straight poker and pound in a little and pull it out. but there was no oring on it?

The o-ring is probably still down in the bore. As they age they often stay behind when the needle comes out.

[justmount1]

well if it is it is in the dip now. i will have to try and pull it out when i get out of the dip

[Guest]

Were you referring to the fuel mixture screw? The pilot jet doesn't have an o-ring.

[justmount1]

no i was refering to pilot jet i thought it did but i got #2 taken apart and it didn't either so figured it didn't

[justmount1]

ok so i got #1&2 carbs taken apart and no guidance line on #2 and also no washer or oring on either air mixture screw

[Dave8338]

ok so i got #1&2 carbs taken apart and no guidance line on #2 and also no washer or oring on either air mixture screw

That would account for some of the issues that you are having. Keep digging, you may be surprised at what you find. :-D

[Billyboy]

I was gonna suggest a big hammer.

[justmount1]

i am looking and i think on bike bandit #68 is air screw but not sure how would i get the washer for it?

[Guest]

The washer and o-ring is still in the carb. Take a look with a flashlight. I've had many stick in there.

[justmount1]

nope they're not in the carbs still



look i put a pic of the bike on now this is what it loks like now ok its not working yet lol

[justmount1]

pic

i hope this shows the pic

[justmount1]

ok how do u post a pic lol