Wiring Aftermarket Ignition Switch

**mortation** · 04-08-2008, 08:03 AM

LoL. OK So I will be the first?

**Agemax** · 04-08-2008, 08:18 AM

i fitted a remote ignition/ start to my gs. really easy to do, looks cool when you can start it up when you are 100 yards away and great to fool potential thieves as they spend too long looking for the ignition switch!

**mortation** · 04-08-2008, 08:23 AM

Originally posted by adrian.max@blueyonder.co.

i fitted a remote ignition/ start to my gs. really easy to do, looks cool when you can start it up when you are 100 yards away and great to fool potential thieves as they spend too long looking for the ignition switch!

Was your remote 3 wires or 2? From the schematic it looks like "on" bridges brown/orange and red/grey. I was thinking about getting a two wire switch, permanently connecting orange/brown with butt connectors and using the switch for red/grey.

**Agemax** · 04-08-2008, 08:29 AM

yes mate thats how i did it, linking the orange and brown together

**mortation** · 04-08-2008, 08:39 AM

Originally posted by adrian.max@blueyonder.co.

yes mate thats how i did it, linking the orange and brown together

Sweet thats what I was thinking.

I am up in the air though about the orange - brown connection. I am thinking of possible using a rocker switch and hiding it some where. Else the bike will be way to easy to steal.

Simply tape a paper clip on the back of the ignition start er up and ride off lol.

Probably going to want to get some sort of caliper lock too since I will be loosing the stem lock.