bike is surging around mid throttle? please read.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kevinwcarr

    #1

    bike is surging around mid throttle? please read.

    have a1983 suzuki gs 850g. 10750 miles. just got bike, previous owner installed a k&n air filter. runs good taking off but soon as you get about 1/4 to 1/2 throttle bike wants to kinda bog down some. Go past 1/2 bike runs very well. could the K&n filter cause this? also the bike between 50 and 60 mph it acts like it has a miss. could the carbs be dirty? should i get kits and have the carbs rebuilt?
  • Guest

    #2
    Do a search for "shim needle"
    Your needle circuit is now lean from the K&N. This will fix you up
    This forum contains old posts which may have information which may be useful. It is a closed forum in that you can not post here any longer. Please post your questions in the other technical forums.

    Comment

    • kevinwcarr

      #3
      thank you so much

      Comment

      • kevinwcarr

        #4
        if i go back to the stock air filter will that fix my problem?

        Comment

        • Guest

          #5
          Originally posted by kevinwcarr
          if i go back to the stock air filter will that fix my problem?
          It might but I doubt it. These bikes were lean from the factory. Do the shim. You'll be happy with it.
          By the way have you done a
          Valve adjustment
          Carb cleaning + o-rings?

          Comment

          • kevinwcarr

            #6
            no have not done valve adjustment yet, mechanic is going to do it. i have a valve cover gasket leaking and the cyclinder head gasket and the base gasket. { leaking oil} . carbs have not been cleaned either that i know of. forgot to mention the bike is really cold natured. after warmed up the bike really does not have a hesitation when sitting still giving it almost full throttle. when he cleans carbs should i get carb rebuilding kits? what orings are you talking about and are they in the carb rebuilding kits?

            Comment

            • Guest

              #7


              Comment

              • Johnny K

                #8
                Confused. Are jet needles the needles that connect to the diaphragms?

                Comment

                • Nessism
                  Forum LongTimer
                  GSResource Superstar
                  Past Site Supporter
                  Super Site Supporter
                  • Mar 2006
                  • 35789
                  • Torrance, CA

                  #9
                  Originally posted by Johnny K
                  Confused. Are jet needles the needles that connect to the diaphragms?
                  Yes, the official name is "jet needle".
                  Ed

                  To measure is to know.

                  Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                  Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                  Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                  KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                  Comment

                  Working...