Stator Replacement Question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Turtleface
    #1

    Stator Replacement Question

    I've got an Electrosport stator to install on my 1100 EZ. Am I correct in thinking that I should just attach the three wires directly to the R/R? This will eliminate the headlight loop as well, right? The R/R unit is also an Electrosport, and the rest of the electrical system has been tested and found ok via digital multi-meter. Thanks for any help you guys can render!
    Tags: None
    • posplayr
      Forum LongTimer
      GSResource Superstar
      Past Site Supporter
      • Dec 2007
      • 23673
      • Tucson Az
      #2
      Originally posted by Turtleface
      I've got an Electrosport stator to install on my 1100 EZ. Am I correct in thinking that I should just attach the three wires directly to the R/R? This will eliminate the headlight loop as well, right? The R/R unit is also an Electrosport, and the rest of the electrical system has been tested and found ok via digital multi-meter. Thanks for any help you guys can render!
      I think there is a post on this subject somewhere.

        Comment

        • Nessism
          Forum LongTimer
          GSResource Superstar
          Past Site Supporter
          Super Site Supporter
          • Mar 2006
          • 35788
          • Torrance, CA
          #3
          Originally posted by Turtleface
          I've got an Electrosport stator to install on my 1100 EZ. Am I correct in thinking that I should just attach the three wires directly to the R/R? This will eliminate the headlight loop as well, right? The R/R unit is also an Electrosport, and the rest of the electrical system has been tested and found ok via digital multi-meter. Thanks for any help you guys can render!
          Yes, I recommend wiring the stator straight into the R/R. R/R output can go straight to the battery (w/15A fuse on the + side), or you can split the outputs and feed them into the bike circuits similar to what Suzuki did.
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

            Comment

            • Steve
              GS Whisperer
              • Jun 2005
              • 35925
              • southwest oHIo
              #4
              Originally posted by posplayr
              I think there is a post on this subject somewhere.
              "A" post?

              I thought it was two or three.


















              Hundred. Yeah, two or three HUNDRED.

              .
              sigpic
              mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
              hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
              #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
              #2 son: 1980 GS1000G
              Family Portrait
              Siblings and Spouses
              Mom's first ride
              Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
              (Click on my username in the upper-left corner for e-mail info.)

                Comment

                Previous template Next
                Working...