Announcement
Collapse
No announcement yet.
Is this engine oil ok to use?
Collapse
X
-
Dcboys81
Is this engine oil ok to use?
I have a 1985 GS450L. In my manual it says to use SAE 10w40, with an API rating of SE or SF. I had gone out to walmart and picked up some 10w40 Valvoline oil, that is SAE 10w40 but the API says SM/SL. I never noticed the API rating before, I had bought motorcycle oil from autozone last fill up. But after going through the manual this API thing kind of bothers me. Should I return the oil and get a SE SF API rating, or can i use the SM/SL? Thanks again in advance.Tags: None
-
As lubrication technology advances the API ratings change. The SE/SF's are replaced by SF/SG and so on. The SM/SL is just the latest formula.
The most important thing is don't use an oil that says "Energy Conserving" in the circle on back of the bottle. That oil has anti-friction additives that could cause your clutch to slip. The 10W40 Valvoline should be OK to use.
Hope that helps,
Buddy09 Yamaha Venture Royal (my first Yamaha)
83 Honda VT500FT Ascot (three of them)
81 GS650G for the wife.
82 Suzuki GS850GL Bought it 3 times, sold it twice, then traded for a nice 82 GS1100G AND a 93 Honda 750 Nighthawk, even WOW!
I am the master of my unspoken words, and a slave to those words that should have remained unsaid.
If ya can't dazzle 'em with brilliance, baffle 'em with B. S.
Motorcycles are like children....They should be seen and not heard.
-
Calvin Blackmore
Originally posted by Dcboys81 View PostI have a 1985 GS450L. In my manual it says to use SAE 10w40, with an API rating of SE or SF. I had gone out to walmart and picked up some 10w40 Valvoline oil, that is SAE 10w40 but the API says SM/SL. I never noticed the API rating before, I had bought motorcycle oil from autozone last fill up. But after going through the manual this API thing kind of bothers me. Should I return the oil and get a SE SF API rating, or can i use the SM/SL? Thanks again in advance.
there is a progression in which newere standard supercede their forerunners.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35583
- Torrance, CA
I'd take back that auto oil and get diesel oil - the typical 15W-40 is fine. It has more high pressure additives than auto oil and is perfectly appropriate for a motorcycle.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
drejal
definitely take that back and get diesel oil like nessism said!
I learned this lesson the hard way It's no fun getting those "energy conserving" additives out of your clutch.
Comment
-
Your quickest assurance of suitability is to look at the API "donut" on the rear panel. I believe the top of the outer ring shows the viscosity. The center shows the grade. The bottom of the outer ring might show "Energy Conserving". If it does, DO NOT USE THAT OIL. I have not yet seen a 40w oil with that designation, but that does not mean that they don't exist.
As mentioned previously, unless you want to go to a bike shop and pay exhorbitant prices for "special motorcycle oil", your best bet is to get diesel oil. Go to your favorite auto parts store, look for Shell Rotella oil. There is a white jug of "regular" oil that is 15w-40, the gallon size is about $12. There is also a blue jug of "synthetic" oil that is 5w-40 for about $20. Either of them will work very nicely.
If your bottles of Valvoline Max Life do not have the "Energy Conserving" designation on the back, go ahead and use them for now, then switch to Rotella for the next change.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
rideOn
if 15-40 is good, tractor supply used to sell it cheap by the gallon. i think it's rotella. an oil wholesaler friend of mine said he can't wholesale that oil cheaper than tractor supplies sells retail.
Comment
-
almarconi
-
1_v8_merc
Comment
-
Calvin Blackmore
Originally posted by 1_v8_merc View PostDiesel oil, hmmmm might give that a try next time, instead of buying that rediculous cycle oil.
Diesel has more detergent in it as well.
They used to laugh at me whenever I had to buy a litre of diesel oil at a service station on a long hard trip.
Comment
-
Originally posted by 1_v8_merc View PostDiesel oil, hmmmm might give that a try next time, instead of buying that rediculous cycle oil.
.Last edited by Steve; 04-02-2010, 07:31 PM.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
SqDancerLynn1
The Rotella works great, It has the extra extrem pressure additives that a deisel requires that are also beneficial to the gearbox
Comment
-
Dave_17954
-
kdo58
energy conserving
i just read this, and went out and checked the oil, I have been using to top off my bike and it is the energy conserving oil, I guess i will change my oil. Hopefully it has not messed up my clutch.
Comment
Comment