ebay-yoshi pipe

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cyclefvr2

    #1

    ebay-yoshi pipe

    ok who out buid me on the pipe??
    good lord who paid 355 for it?, thats way to high, i went 70 and was out
    i hate ebay because of ppl bidding each other up to high
    who ever got it must have wanted it bad ,enjoy
    what performance gain is there over thae vance n hines repackable pipe????
  • posplayr
    Forum LongTimer
    GSResource Superstar
    Past Site Supporter
    • Dec 2007
    • 23673
    • Tucson Az

    #2
    Originally posted by cyclefvr2
    thats way to high, i went 70 and was out
    ???
    I can understand your frustration, but $70 is too low for a Yoshi

    Comment

    • doctorgonzo

      #3
      I came in with $200 with 10 minutes left, been watching it all week, that was my max. In the final 10 seconds it went to $335, so somebody put in $330 and got beat by somebody who bid > $330 all in the last 20 seconds or so.

      That seller, who had no idea what he had, is turning cartwheels right now.

      Comment

      • Shin-Ken 1074
        Forum Sage
        Past Site Supporter
        Super Site Supporter
        • Feb 2008
        • 1904
        • Brisbane Queensland Australia

        #4
        Even at $335 its still a cheap pick up for someone for a set of Yoshi's, as long as they are the right pipes for your bike.
        Badgezz, we don need noh stinkin' badgezz!
        Shin-Ken 1074
        1982 GSX1100SXZ Wire Wheel Katana - BOM Nov 2011
        1981 GSX1135 Katana Build completed Mar 2024, Curb Weight, all fluids and 21 lt fuel = 206 kg.

        Comment

        • posplayr
          Forum LongTimer
          GSResource Superstar
          Past Site Supporter
          • Dec 2007
          • 23673
          • Tucson Az

          #5
          Originally posted by doctorgonzo
          I came in with $200 with 10 minutes left, been watching it all week, that was my max. In the final 10 seconds it went to $335, so somebody put in $330 and got beat by somebody who bid > $330 all in the last 20 seconds or so.

          That seller, who had no idea what he had, is turning cartwheels right now.
          He can do the cartwheels after he gets paid. Lots of times buyer pulls out when they realize after the fact they bid too much

          Comment

          • doctorgonzo

            #6
            They are a pair of old Yoshi cans on there right now for a 4 to 2 as well (I'm giving it away, but the vultures will all spot it eventually anyway. Wondering if with fabrication you could make one fit a 4 to 1 and still have a can left over? That or go off the beaten path with 4 to 2.

            Comment

            • posplayr
              Forum LongTimer
              GSResource Superstar
              Past Site Supporter
              • Dec 2007
              • 23673
              • Tucson Az

              #7
              Originally posted by doctorgonzo
              They are a pair of old Yoshi cans on there right now for a 4 to 2 as well (I'm giving it away, but the vultures will all spot it eventually anyway. Wondering if with fabrication you could make one fit a 4 to 1 and still have a can left over? That or go off the beaten path with 4 to 2.
              FYI most all the older Yoshi cans use a 2 1/2" mid pipe and the same collar closest to the rear bracket support. I have picked up two of the nozzle type NOS. The oval and other RS-3 type are 2 1/4"

              Comment

              • Guest

                #8
                The newer oval stainless/carbon RS-3 Yosh cans occasionally come up on the local Kijiji and Craigslist for relatively cheap (< $200, used)....also found at the local bike show/swap meets in January (Toronto). Having a mid-pipe made up at a muffler shop should cost around $100 at most....some cans have a sliding strap stay, which simplifies mounting issues. Someone here has done this (I forget who, but it was one of our older members), and it looked kick-ass on his E. So that is a good option (I'll probably go this route myself, if/when it becomes necessary, though my existing system is still going strong) if you aren't a stickler for the 'period correct' look.
                With Gixxer type running gear, the period-correct look is already blown away, so that makes this mod even more attractive.
                Tony.

                Comment

                • Guest

                  #9
                  I have been looking at Bassanis for years, I have a yosh GS11 megaphone hanging on the wall. It will hang until i get a Bassani to replace it (on the wall) I probably will never get one at this point, I waited too long I fear.

                  That is the thing about old stuff, depending on what it is for, it gets pricier. It is still cheaper than KZ stuff. In 30 years busa parts will be collectibles.

                  Check out Kawi H2 stuff (my latest toy). A set of nice denco chambers can go for close to a grand.

                  Comment

                  • first timer
                    Forum Sage
                    • Aug 2002
                    • 3429
                    • Tucson, Arizona

                    #10
                    i paid more a bit more then 355 for my yosh pipe a few years back. It only went for 355 now due to economy in the crapper. If you want a yosh pipe in nice shape you better have atleast 500 in in your war chest and hope you can get it for less.
                    78 GS1000 Yosh replica racer project, 82 Kat 1000, 10 990 ADV-R, Some dirt bikes

                    Comment

                    • posplayr
                      Forum LongTimer
                      GSResource Superstar
                      Past Site Supporter
                      • Dec 2007
                      • 23673
                      • Tucson Az

                      #11
                      Originally posted by first timer
                      i paid more a bit more then 355 for my yosh pipe a few years back. It only went for 355 now due to economy in the crapper. If you want a yosh pipe in nice shape you better have atleast 500 in in your war chest and hope you can get it for less.

                      Ryan,

                      I must have lucked out; I got a race Yoshi (under belly) (pretty nice can , solid metal but a little pitted) that I got for about $135-$150 off e-bay.

                      IIRC, it was on one of the lowest days plunging market days in the fall of 08 .

                      Jim

                      Comment

                      • nvr2old
                        Forum Sage
                        • Jan 2009
                        • 2134
                        • Sandpoint, Idaho

                        #12
                        Every now and then a jewel comes along at an unbelievable price. I scored this mint condition, period perfect Yosh racing pipe for $11.50. I did, however, set a high bid at $500, and would have gladly paid that. I had the only bid on a no reserve auction. Sometimes you're in the right place at the right time.

                        1979 GS1000S,

                        1982 Honda CX500 Turbo, 1982 Honda MB5 w/CR80 motor, 1977 Honda "nekid" Goldwing, 1976 Honda CB550F cafe', 1972 Honda XL250 cafe'

                        Comment

                        • posplayr
                          Forum LongTimer
                          GSResource Superstar
                          Past Site Supporter
                          • Dec 2007
                          • 23673
                          • Tucson Az

                          #13
                          U down right stole that durn pipe

                          Looks good ; Bike even better

                          Originally posted by nvr2old
                          Every now and then a jewel comes along at an unbelievable price. I scored this mint condition, period perfect Yosh racing pipe for $11.50. I did, however, set a high bid at $500, and would have gladly paid that. I had the only bid on a no reserve auction. Sometimes you're in the right place at the right time.

                          Comment

                          • doctorgonzo

                            #14
                            That's pretty close to hitting the lotto.

                            Comment

                            • Guest

                              #15
                              +1, that looks fantastic, slightly similar in look to the latest GP style cans!
                              Probably pretty loud?
                              Tony.

                              Comment

                              Working...