Top End Oiler Project

[rich001]

Just checking in to see if you have had any time to put towards the oiler kits Greg???

Just checkin'

Richard

[rich001]

Richard

[Greg B]

I am still making parts.
They do, however, take a lot of time.
One of the things I am severely lacking, for the most part.

[7981GS]

I sent you an E-mail just yesterday.
Can you sell me just the three pieces without the hoses and fittings?
Two sets at least?

Eric

[rich001]

Thank you Greg,

I hope you don't think I am pestering you. I totally understand the way that our life can become a real drain on our time resources. You have already put a HEAP of your own time with what you have achieved so far and it obviously takes a HEAP more time to continue with such a good product.

I will continue to check in from time to time ( I just know I can't stop myself from asking until you advise us all that they are ready).

So good on you and keep up the good work ( when you can).

Richard

[Greg B]

Progress Update

Starting to get a few components together.

-6 AN to 1/8 NPT straight & 90deg. fittings.


-6 AN hose ends.
I decided to go this route after some suggestions that the original
crimped hoses I had been using looked a bit cheap. I really like these better anyway.


40 ft. of -6AN hose


I still need to machine a crap load of feed thru bolts, but the material is ordered & should arrive this week. Once all the parts are machined, I will send it out for anodize.

Also, made a small run of cam chain tensioners & will have these ready around the same time as I get the oiler kits finished.

[7981GS]

GregB is great to do business with and his products are top of the line!




Eric

[KC1908]

Greg, can you keep two sets away from the anodizer?

I bought two sets last time, one anodized, one not and prefer the unanodized one on the black motor. It polished up quite well.

Ken

[Greg B]

Greg, can you keep two sets away from the anodizer?

I bought two sets last time, one anodized, one not and prefer the unanodized one on the black motor. It polished up quite well.

Ken

Yes, I can.

[Guest]

Greg,
I'll take two kits as well.One anodized and one plain if possible.Let me know if you need a deposit as well.No big rush as wellThanks Rich

[Guest]

I won't miss out this time

[Guest]

How much for the plain tensioner?

[rich001]

Oh oh oh me me me me.

2 sets please. One black & one unanodised at your leisure. No rush.

Thanks
Richard

[pano]

I am in for (1) set that retains the oil sensor, black or plain is ok.

[roadguy]

Just stumbled across this thread very interesting I have an 82 Katana and think 1 of these is much needed how to I go about getting a price and info on the top end oiler looks awesome thanks.