About front brake master cylinder

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tompasio
    #1

    About front brake master cylinder

    If change my master cylinder on the handlebar to a 2007 Hayabusa, Will there be any improvment with standard calipers?
    Bike is a GSX 750 ES 1983
    Tags: None
    • tkent02
      Forum LongTimer
      Past Site Supporter
      • Jan 2006
      • 35571
      • Near South Park
      #2
      What is the piston diameter?
      If it is smaller it will improve the braking, as long as the lines are good...

      You do have braided lines?
      http://img.photobucket.com/albums/v5...tatesMap-1.jpg

      Life is too short to ride an L.

        Comment

        • Tompasio
          #3
          No, original rubber hoses.

            Comment

            • hampshirehog
              Forum LongTimer
              Past Site Supporter
              • Oct 2007
              • 12675
              • Hampshire. UK
              #4
              Try putting on braided hoses before you do anything else - you'll be surprised at the difference.
              79 GS1000S
              79 GS1000S (another one)
              80 GSX750
              80 GS550
              80 CB650 cafe racer
              75 PC50 - the one with OHV and pedals...
              75 TS100 - being ridden (suicidally) by my father

                Comment

                • Turtleface
                  #5
                  Originally posted by Tompasio
                  No, original rubber hoses.
                  The OE rubber lines are supposed to be replaced every two years.

                  Might as well just buy the parts to make stainless lines. It's dead simple, and the improvement is vast, at least for me. Plus, you don't have to keep replacing them.

                    Comment

                    Previous template Next
                    Working...