Announcement

Collapse
No announcement yet.

About front brake master cylinder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    About front brake master cylinder

    If change my master cylinder on the handlebar to a 2007 Hayabusa, Will there be any improvment with standard calipers?
    Bike is a GSX 750 ES 1983

    #2
    What is the piston diameter?
    If it is smaller it will improve the braking, as long as the lines are good...

    You do have braided lines?


    Life is too short to ride an L.

    Comment


      #3
      No, original rubber hoses.

      Comment


        #4
        Try putting on braided hoses before you do anything else - you'll be surprised at the difference.
        79 GS1000S
        79 GS1000S (another one)
        80 GSX750
        80 GS550
        80 CB650 cafe racer
        75 PC50 - the one with OHV and pedals...
        75 TS100 - being ridden (suicidally) by my father

        Comment


          #5
          Originally posted by Tompasio View Post
          No, original rubber hoses.
          The OE rubber lines are supposed to be replaced every two years.

          Might as well just buy the parts to make stainless lines. It's dead simple, and the improvement is vast, at least for me. Plus, you don't have to keep replacing them.

          Comment

          Working...
          X