Considering Dyna green coils for my 1100..

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Katarat

    #16
    Can you leave the stock IC Ignitor setup with just running the green coils alone ?

    Comment

    • Guest

      #17
      Originally posted by Katarat
      Can you leave the stock IC Ignitor setup with just running the green coils alone ?
      Yes.........................................

      Comment

      • fullmetalone

        #18
        Originally posted by Turtleface
        3.0 ohm Greenies, or those nice Accel coils. Any aftermarket coil should suffice really, as long as you get the correct ohms for your setup.
        i'm giong to be stock other than a header/megaphone.. Can i still just straight swap out the coils for the greenies? I guess what i'm asking is how do you know what Ohms is right for my setup..

        Comment

        • Krunk_Kracker

          #19
          Originally posted by fullmetalone
          i'm giong to be stock other than a header/megaphone.. Can i still just straight swap out the coils for the greenies? I guess what i'm asking is how do you know what Ohms is right for my setup..
          Ignition has nothing to do with your exhaust. Just replace them with the 3.0, they work fine.



          Just be sure to get either resistor wires or resistor boots, but not both. I went with the boots because I really like how they look.

          Comment

          Working...