cam degree specific question

[Guest]

Hi all,

Reassembling my 83 es, to mount the degree wheel, do I understand things correctly that I unscrew the rotor mount nut, put some spacers in, then the wheel, then I can use the rotor nut to secure the wheel? Be patient with me, it's my first time....heh...

[posplayr]

I think Ray might use the other side and claims one side or the other inaccurate. Last I did it with Bill we checked TDC on each cylinder wrt the wheel.

as you probably know the 83 have welded crank so it should be straight.

[Guest]

nvm, i grok now. the wonders of search...

[posplayr]

A little controversial but worked excellent.

http://www.thegsresources.com/_forum/showthread.php?139950-High-Accuracy-Degree-Wheel&highlight=Degree+wheel

[Guest]

I have extensively perused your posts, Jim, thanks for all the help both directly and indirectly. BTW, any idea where i can get 3 of the fukushawa (?) terminals that go into the plastic shell? I am replacing my stator and I need some new terminal ends. eastern beaver has them, but i cant come up with a 20 dollar minimum order. wish i could just go down to autostoned and pick them up....

[posplayr]

Are you asking about weather pack 3 pin connector on the. Compufire stator connection? If so most auto parts stores will have those or amazon.

[Guest]

these little guys: http://www.easternbeaver.com/Main/El...onnectors.html

f250-qlw2030. Maybe i will just order the triumph connector and start from scratch.