My bike 1983 suzuki gs750ed. I want to convert to a hydraulic clutch, why? there is much to be desired when the clutch, linkage and assembly come into play on these gs's. Ken Meredith built a 83 gs750es back in the early 90's and he did this conversion, it was a front sprocket cover with hydraulic slave cylinder from a Canadian 1984 suzuki katana gs750s pop up headlight anniversary edition (gold frame/gold valve cover) I actually contacted Ken a couple of weeks ago on the phone and spoke with him about his build. Extremely nice guy and glad to know he actually still has the bike after all these years. So what im looking for is a part number for the cover, a parts diagram, a salvage yard that may have one, or maybe a NOS part. after extensive searching on the interwebs ive had no luck. maybe because this bike was only a south africa, japan and canada market bike. anyways tell me what you experts think? is it a lost cause or do i have to fabricate modify my existing front sprocket cover and adapt a hydraulic slave cylinder for the clutch? Thanks Scot.
-
-
New Zealand got them too - and Australia I think. Try the internet buy/sell sites local - trademe in NZ and gumtree in Australia.
Most likely source is from someone putting an 1100 motor in for a racebike... -
thank you i will try that. Were they called the "shark'' in New Zealand and Australia?Comment
-
UK got a few as wellComment
-
If Agemax is still around, you should talk to him. He set out to convert his GS1000 to a hydraulic clutch a long time ago."Thought he, it is a wicked world in all meridians; I'll die a pagan."
~Herman Melville
2016 1200 Superlow
1982 CB900fComment
-
This was one suggestion at the time:
"Thought he, it is a wicked world in all meridians; I'll die a pagan."
~Herman Melville
2016 1200 Superlow
1982 CB900fComment
Comment