82 GS750E to GSXR1215 restomod

[Guest]

I don't know how thick the frame tube is the cross piece I put in is 1 1/4 .065 dom .

[Guest]

New parts have arrived!!!



more stuff painted today

[Guest]

Looking good!
G

[Guest]

A little more progress

[Guest]

new pics i finnally figured out how to switch back to original photobucket so i can post full size again

getting a look at the rear



and the side view




a look at shock mount

[motomike]

This bike rocks! Cant wait to see it finished. Keep up the good work

[T8erbug]

Love the evolution of the bike. Definitely headed in the right direction (although not a fan of the carbon fiber. Not opposed to carbon fiber parts just stuff that looks like carbon fiber and isn't ha) Who cares though right!? Different strokes for different folks. Love love love the bike

[Guest]

I get you on the faux carbon but it was a cheap alternative to paint and I was able to apply it myself.

[amxsteve]

new pics i finnally figured out how to switch back to original photobucket so i can post full size again

getting a look at the rear



and the side view




a look at shock mount.

My shock mount is similar but I braced the top part to the upper tubes on an angle just incase. I can dig up a pic if you like

[T8erbug]

I get you on the faux carbon but it was a cheap alternative to paint and I was able to apply it myself.

Yeah at least you did it on the body and not on solid steel parts or something haha! Have you ridden it much since the wheel and rear swingarm swap?

[Guest]

Not rode yet still putting it back together probably won't be able to till maybe march depends on when the weather breaks its only 20 degrees outside

[Guest]

More pics of progress

upper fork clamp on with handelbars





i was a little worried about the 15 degree risers but after sitting on it they feel great good position


i got one foot control mounted





hope to get other side on tommorow


fitted the headlight and found the 7" is just to small for the wider forks



i think the trainlight is a must have

[DannyMotor]

Since all your carbon/graphics layouts are done.... you should do 3-5 coats of clear over the whole thing.... then polish the crap out of it.... it will look AMAZING.

[Guest]

progress has been slow lately been very cold and still waiting for rear rotor but i got front brake lines all on and the swingarm spools and went and bought a rear wheel lift from harbor freight






for 39.95 i think its a decent buy

[Guest]

pics of 8" train light installed




I think i need to figure out a way to cover the back side of the gauges open to any suggestions