.png "Powered by vBulletin")
For the love of God..find someone that can match that paint.....LOL
-
MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it. -
Petcock is off eBay from Honda east Toledo
$87 shipped.... Couldn't find any correct used ones to rebuild....so...
Rear shocks.... I'll try and see what the snowmobile guys up north can do for me. All the shock places I tried to contact would have nothing to do with the shocks, or wanted $200 just to chrome one shaft...and that's with me taking the shock apart and rebuilding it myself afterward.
There is a guy in Japan that does KYB shocks and can get parts factory direct. Rebuild/rechrome them at a very good price...The shocks I have were Japanese home market only shocks, so he knows what they are, while no one here on my side has ever seen them before...
I think I have a close enough match for the paint, that it will work on a fender now... If I don't forget to bring the fender into work, might have it done by Friday too. And if it's close enough, I'll send the sprayout card out for some reference.Last edited by Guest; 11-15-2016, 08:44 PM.Comment
-
wow, very nice period pieces.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533Comment
-
They are off a 1994 home market Katana
Disregard my info on the fuel tap earlier this week.... It is for a G model...
looks almost the same except outlet is on the wrong side.
Comment
-
Chuck has promoted the early '77-'79 GS750 petcocks as fitting with only different direction vent tubing on the back.2@ \'78 GS1000Comment
-
Yes the 77/78 750 petcocks are the same as the 78/79 1000 tanks. I have 750 petcocks on my 1000s and other than the nipple arrangements its the same exact petcock.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
I can see it's the exact same casting. But it looks like the fuel line will rub on the carb, as it exits directly into the slide (if the 750 tap is the same as the 1000G) . Unless I could find some prebent fuel line with a sharp 90 that I could adapt. Or drill out the the casting on the proper side, put the nipple on that side, and tap and run a set screw plug in original hole... I guess there are options... I used JB weld on my one with holes, and might see if that still works as well.Last edited by Guest; 11-17-2016, 07:34 AM.Comment
-
All I know is all my 1000s hav VM carbs and none of them have any problems using the 750 taps. Mabe you can rotate the back plate if your concerned about close clearance???MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
2@ \'78 GS1000Comment
-
Not much room for my hose
The back plate isn't a problem, the main line out is.
Not much more than 3/4 inch from outlet to carb body... I tried my other tap after JB weld, and it still drips a bit around the lever... Think I'll try and find a fuel line that has a tight 90 that I can adapt to the new tap. The fuel line I have rubs the carb body, and looks like it would want to kink a bit if the line got soft from the hot engine.
I can make it work, but it has to look right, which is the problem at the moment.Comment
-
Get a piece of soft copper tubing and gently bend a 90 into it. Then a short piece of fuel line to couple it to the petcock. Then run the line to the carbs???MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
The soft copper could possibly work. I did that on my carb bowl vents after I removed the hoses as a part of the jet kit install. I didn't like the idea of open nipples just facing straight up and the possibility of dirt falling in them. I made small u bends and attached them with hose as Chuck noted.
Or what about that metal spring looking material that slips over the line to prevent kinking? Sorry for the poor description, I dont know what its called. ...sigpic
When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"
Glen
-85 1150 es - Plus size supermodel.
-Rusty old scooter.
Other things I like to photograph.....instagram.com/gs_junkie
https://www.instagram.com/glen_brenner/
https://www.flickr.com/photos/152267...7713345317771/Comment
-
Apparently its called an anti kink spring.....sigpic
When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"
Glen
-85 1150 es - Plus size supermodel.
-Rusty old scooter.
Other things I like to photograph.....instagram.com/gs_junkie
https://www.instagram.com/glen_brenner/
https://www.flickr.com/photos/152267...7713345317771/Comment
-
The spring idea looks like what the factory would do....I might have something like that....
Time to do a little searching...Comment
-
Factory actually sells a spring like that for the factory fuel hose http://www.ronniesmailorder.com/oemp...ecc5/fuel-cock1978 Gs1085 compliments of Popy Yosh, Bandit 1200 wheels and front end, VM33 Smoothbores, Yosh exhaust, braced frame, ported polished head
1983 Gs1100ESD, rebuild finished! Body paintwork happening winter 2017
I would rather trust my bike to a technician that reads the service manual than some backyardigan that THINKS HE KNOWS how to fix things.Comment
.png)
Comment