1127 into 82 GS750E

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #31
    IMG_1783.jpg


    Wheels, tires and exhaust ready

    Comment

    • Guest

      #32
      IMG_1784.jpg

      More parts ready - motor goes into frame tomorrow - taking the simpler route and going with the air cooled one

      Comment

      • Guest

        #33
        1100E motor fitted, valve clearance checked and adjusted (only 2 were off), cases removed for painting (baking in the oven as I type )

        onward and upward !!

        IMG_1789.jpg

        Comment

        • steve murdoch
          Forum Guru
          Past Site Supporter
          • May 2004
          • 8512
          • St. Catharines, On.

          #34
          I well know the smell of curing paint.
          An excellent project to follow.
          2@ \'78 GS1000

          Comment

          • Guest

            #35
            Frustrating day dealing with chain alignment - guess I underestimated the subtle differences between parts, other people's experience and my lack of patience

            first look -

            IMG_1411.jpg

            Comment

            • Guest

              #36
              A few spacer changes here , a few there and we're close ( or so I thought)

              IMG_1413.jpg

              Comment

              • Guest

                #37
                At the end (post this picture) I shortened the chain, mounted everything up and got the laser out .......

                turns out that an 82 750E frame, 82 1100E engine, Modified Calfab arm, unknown year 5.5" GSXR rear wheel, 530 chain and sprockets..... is a little different and I need a 3/8 offset sprocket IMG_1414.jpg

                Comment

                • Guest

                  #38
                  Started to button up the motor and as it's electrical upgrades next thought I'd better throw in a new stator.

                  the old one was ok other than some brittle shrouds on the connectors, however, while you're in there - why not



                  IMG_1813.jpg

                  Comment

                  • Guest

                    #39
                    Slowly, slowly as they say in Greece

                    IMG_1419.jpg

                    Comment

                    • fortysixand2

                      #40
                      looks great *thumbup*

                      Comment

                      • Guest

                        #41
                        Productive day today - motor all buttoned up
                        every external case gasket replaced, all SS hex bolts

                        IMG_1430.jpg

                        Comment

                        • Guest

                          #42
                          Fitted the USD. Front end

                          IMG_1436.jpg

                          Comment

                          • Guest

                            #43
                            Preparation pays I guess

                            IMG_1429.jpg

                            Comment

                            • Guest

                              #44
                              RC51 master cylinder and switchgear

                              IMG_1434.jpg

                              Comment

                              • steve murdoch
                                Forum Guru
                                Past Site Supporter
                                • May 2004
                                • 8512
                                • St. Catharines, On.

                                #45
                                Excellent use of the lawn furniture.
                                Looks cool so far.
                                2@ \'78 GS1000

                                Comment

                                Working...