Going to measure cam chain,problem is my caliper only goes to 150mm or 6 in. Would it be o. k. to split measurement say measure 75mm mark then measure from there to end of the 23 links or is that bad idea.dont want to buy another one, the price really jumps from the 6 in to 8 in. caliper.plus no one has 8.in. caliper around me for sale would have to order over net.I know its dumb thing to ask So stop yelling at me!!!
-
-
thats crossed my mind,dont want change cam chain if i dont have to.because i am leary of master links and dont want to split cases. probably would not ever run againComment
-
you arent gonna measure it properly if its still in the engine! why measure it in the first place if you then decide you need a new one?
people have a bad view of split link chains but if fitted CORRECTLY they will not give you any grief. people will disagree with me but its all down to personal choice1978 GS1085.
Just remember, an opinion without 3.14 is just an onion!Comment
-
What engine is it and how many miles?Comment
-
i thought you could measure them still in the engine. 83 1100 not sure about miles po had no speedo cable on in for 3 or 4 years but it has 27,000 hard miles.there is some chatter and the chain has some play between the cams more than I think there should be so I was going to check it out.Last edited by Guest; 10-08-2009, 01:54 PM.Comment
-
Comment
-
tensioner will be check. po had bike shop re- furbished it, her words not mine.she said x boyfriend ran the $$#@! out of it.I can move the chain about 3/4 of a inch up and down between cams.I just thought on other bikes i had there was hardly any slack thereComment
-
See if the screw on the left side of the tensioner was not released, does the big thumbwheel on the right side of the tensioner move freely? A worn chain can't make it go slack like that if the tensioner is working... Probably the bike shop that refurbished it did not have a clue how to do it.
x boyfriend running the $$#@! out of it won't hurt a thing, we all do that.Comment
Comment