The current setup on my GS works ok, but it is not stock. I am thinking of having some carb work done and it might be a good time to change petcocks. I am very wary of vacuum petcocks. Anyone have any advice about choosing the OEM Suzuki part versus a possible alternative? Thanks David
-
-
Vacuum petcocks are great, but the one on 1980 Suzukis is a very bad choice.
The problem is the bolt spacing is different than the other years, and there isn't much room under the gas tank for a Pingel or other brand...
You may be stuck with a stock replacement. -
i did this, but made my own plate vs buying the blank. cost me 15 bucks total.
The valve is available from biker's choice.Comment
Comment