Suggestions for new fork seals

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • glib
    Forum Sage
    Past Site Supporter
    • Jul 2014
    • 1175
    • Stockton, CA

    #1

    Suggestions for new fork seals

    Doesn't seem too complicated but the ones I just installed, which sat here for three years because I didn't need them, leaked immediately after install. Suggestions for brand/source for replacements? GS1100ES
    Last edited by glib; 01-29-2018, 01:33 PM.
    sigpic
    1983 GS1100ES (Bought July 2014)
    1983 GS1100E (Bought July 2014)
    1985 GS700ES (Bought June 2015) Sold
    On Christ the Solid Rock I Stand
    All Other Ground is Sinking Sand
  • Greg B
    Forum Mentor
    Past Site Supporter
    • Sep 2005
    • 894
    • Irvine, CA

    #2
    Either your local Suzuki dealer, or All Balls on eBay.
    The Three Horsemen
    '85 GS1150ES (Current Income Eater)
    '83 GS1100ES
    ?77 XLCR

    "Never ride faster than you can see. Besides, it's all in the reflexes."
    Porkchop Express

    Comment

    • glib
      Forum Sage
      Past Site Supporter
      • Jul 2014
      • 1175
      • Stockton, CA

      #3
      Originally posted by Greg B
      Either your local Suzuki dealer, or All Balls on eBay.
      Thanks. Just ordered All Balls 55-148.
      sigpic
      1983 GS1100ES (Bought July 2014)
      1983 GS1100E (Bought July 2014)
      1985 GS700ES (Bought June 2015) Sold
      On Christ the Solid Rock I Stand
      All Other Ground is Sinking Sand

      Comment

      • Guest

        #4
        Originally posted by glib
        Thanks. Just ordered All Balls 55-148.
        Make sure there are no sharp edges that may cut the seal during installation and use a bit of grease or oil on the seal lips so they don't dry tear before things get working.


        Mark

        Comment

        • bonanzadave
          Forum Guru
          Past Site Supporter
          • Jul 2006
          • 9623
          • Minnesota

          #5
          Originally posted by mmattockx
          Make sure there are no sharp edges that may cut the seal during installation
          Word ! Your tubes need to be near perfect. No nicks, corrosion, pitting or scratches. And don't put em in upside down.
          82 1100 EZ (red)

          "You co-opting words of KV only thickens the scent of your BS. A thief and a putter-on of airs most foul. " JEEPRUSTY

          Comment

          • bwringer
            Forum LongTimer
            Bard Award Winner
            GSResource Superstar
            Past Site Supporter
            Super Site Supporter
            • Oct 2003
            • 17066
            • Indianapolis

            #6
            OEM Suzuki fork seals last the longest.
            1983 GS850G, Cosmos Blue.
            2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
            2015 Yamaha FJ-09, Magma Red Power Corrupts...
            Eat more venison.

            Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.

            Celeriter equita, converteque saepe.

            SUPPORT THIS SITE! DONATE TODAY!

            Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!

            Comment

            • glib
              Forum Sage
              Past Site Supporter
              • Jul 2014
              • 1175
              • Stockton, CA

              #7
              Originally posted by bonanzadave
              Word ! Your tubes need to be near perfect. No nicks, corrosion, pitting or scratches. And don't put em in upside down.
              I can't swear that the tubes are perfect but they look it and the original seals were not leaking. I wish I'd left them alone. I had done my other bike a couple years ago and didn't think it was difficult so...
              sigpic
              1983 GS1100ES (Bought July 2014)
              1983 GS1100E (Bought July 2014)
              1985 GS700ES (Bought June 2015) Sold
              On Christ the Solid Rock I Stand
              All Other Ground is Sinking Sand

              Comment

              • NavyDad

                #8
                Ask the wife/girlfriend/daughter/neighbor lady for a old pair of pantyhose. Wipe the fork tubes down with them and if there is a snag the material will find it.

                Comment

                • glib
                  Forum Sage
                  Past Site Supporter
                  • Jul 2014
                  • 1175
                  • Stockton, CA

                  #9
                  Originally posted by NavyDad
                  Ask the wife/girlfriend/daughter/neighbor lady for a old pair of pantyhose. Wipe the fork tubes down with them and if there is a snag the material will find it.
                  That's a great idea but with a wife and six daughters is still haven't seen pantyhose in years. (I'll find some)
                  sigpic
                  1983 GS1100ES (Bought July 2014)
                  1983 GS1100E (Bought July 2014)
                  1985 GS700ES (Bought June 2015) Sold
                  On Christ the Solid Rock I Stand
                  All Other Ground is Sinking Sand

                  Comment

                  • Steve
                    GS Whisperer
                    • Jun 2005
                    • 35925
                    • southwest oHIo

                    #10
                    Just go into your bathroom, grab a few pieces of toilet tissue off the roll. They will work just about as well as pantyhose.

                    .
                    sigpic
                    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                    #2 son: 1980 GS1000G
                    Family Portrait
                    Siblings and Spouses
                    Mom's first ride
                    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                    (Click on my username in the upper-left corner for e-mail info.)

                    Comment

                    • NavyDad

                      #11
                      Originally posted by Steve
                      Just go into your bathroom, grab a few pieces of toilet tissue off the roll. They will work just about as well as pantyhose.

                      .
                      Yeah, but it's not as much fun.

                      Comment

                      • dorkburger
                        Forum LongTimer
                        Past Site Supporter
                        • Jan 2013
                        • 10770
                        • Stupid Freehold Boro NJ

                        #12
                        +1 on not installing them upside down. When I did mine a couple of years ago exactly half of the fork seals were installed upside down. I found no mention of direction in the factory or Clymer manuals at the time.
                        sigpic
                        When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"

                        Glen
                        -85 1150 es - Plus size supermodel.
                        -Rusty old scooter.
                        Other things I like to photograph.....instagram.com/gs_junkie
                        https://www.instagram.com/glen_brenner/
                        https://www.flickr.com/photos/152267...7713345317771/

                        Comment

                        • glib
                          Forum Sage
                          Past Site Supporter
                          • Jul 2014
                          • 1175
                          • Stockton, CA

                          #13
                          Definitely no snags to the TP. And I was careful to get them in correctly. I?ll check again though.
                          sigpic
                          1983 GS1100ES (Bought July 2014)
                          1983 GS1100E (Bought July 2014)
                          1985 GS700ES (Bought June 2015) Sold
                          On Christ the Solid Rock I Stand
                          All Other Ground is Sinking Sand

                          Comment

                          • glib
                            Forum Sage
                            Past Site Supporter
                            • Jul 2014
                            • 1175
                            • Stockton, CA

                            #14
                            So embarrassing. I did have them in upside down. I don't know how I could have done that. I know how they go in. Ugh.

                            All together again. Emulator springs at 1.5 turns. Ride tomorrow.
                            sigpic
                            1983 GS1100ES (Bought July 2014)
                            1983 GS1100E (Bought July 2014)
                            1985 GS700ES (Bought June 2015) Sold
                            On Christ the Solid Rock I Stand
                            All Other Ground is Sinking Sand

                            Comment

                            • bonanzadave
                              Forum Guru
                              Past Site Supporter
                              • Jul 2006
                              • 9623
                              • Minnesota

                              #15
                              Originally posted by bonanzadave
                              And don't put em in upside down.
                              Originally posted by glib
                              So embarrassing. I did have them in upside down.
                              82 1100 EZ (red)

                              "You co-opting words of KV only thickens the scent of your BS. A thief and a putter-on of airs most foul. " JEEPRUSTY

                              Comment

                              Working...