30 results in 0.0059 seconds.
-
Gs1000g troubles
I recently started trying to fix and run my dad’s old gs1000g and I have absolutely no clue what I’m doing, for starters it won’t start... -
impossible task of fitting rubber boot to brake caliper
Hi,
I'm having a hell of a job fitting the boot to my rear brake caliper. There is only the smallest of ridges for the boot to fit the boot... -
Return to the forum, finally ready to get to work on my GS1000G
I registered for this forum when I got my 1980 GS1000G 1-2 years ago. One other motorcycle project, a house purchase, and a wedding later, I'm finally... -
axel bolt for brake calliper really difficult to remove GS1000G
Hi,
I was just giving my front left brake calliper (newer type with square pads) an overhaul when I found that one of the axel bolts was... -
Gs1000g carb stutter at 2500 to 3000 revs
Hi,
i recently serviced my carbs but the bike still doesn’t run right. It seems to stutter at 2500 to 4000 revs regardless of gears....Last edited by Guest; 09-19-2018, 04:48 AM. -
Pictures of my GS1000G
Here are some pictures of my GS1000G that recently passed the German TUV inspection. But I still have to wait 2 weeks to get the number plates, Bah Hamburg!...Last edited by Guest; 08-14-2018, 03:25 PM. -
gs1000g now starts but still running rough at high revs
Hi,
With the new starter motor my GS now starts right up and ticks over nicely. trouble is when revving to higher revs when it sputters and... -
gs1000g starter motor, which is best Mitsuba or Nippon Denso?
I just took my Mitsuba starter apart and it looks to me like junk. Totally dirty and rusty. There is continuity between the housing and the positive bolt.... -
where does the hole on the starter motor housing on GS1000G drain to?
Hi,
I was replacing the starter motor cable on my GS1000g when I lost the nut, I tried to fish it out but it seemed to disappear at the...Last edited by Guest; 03-31-2018, 08:06 AM. -
Suggestion of a good earth point
Hi,
I have a GS1000G which recently had a bit of an electrical fire which I think was because the earth point wasn't very good. Now winter... -
gs1000g do I have the right wiring harness
Hi
I bought a wiring harness for my gs1000g it was advertised as for a 1980 gs1000g and it looks like this, on the instrument end are a load... -
trying to get my seat to look original
Hi,
I am trying to sort out my seat of my 1980 suzuki gs1000g. The cover is in a bit of a mess (and the seat pan!) and I would like to recover... -
rubber intake boots, which way up
Hi
Just a quicky, I am refitting my carbs and replaced the boots, They can go either way up, I am guessing that the letter (L and R) is facing...Last edited by Guest; 05-06-2017, 01:45 PM. -
bs34 cv carb slides getting stuck at top
Hi
I just fitted new diaphragms to the carbs on my gs1000g. I tested them by pushing the slide all the way up and seeing how the slide came... -
gs1000 gap between air filter and housing
Hi,
When I went to change my airfilter I noticed that the previous owner had added some spongy material between the airfilter and the housing...
