1150 EF updating project

[Busafied]

Are you going to try and use the MS like Busa suggests to control an ignition?

I was thumbing through the links and am amazed at how much they are doing with this project.

Busa, are you just having someone you know build it, or are buying it assembled and tested? Are you planning to just use it for injection, or are you going to try and do some sort of ignition control as well? I would like to hear about what you guys do with this.

I am buying it from someone I met on the suzukihayabusa.org board-
Assembled,Tested, and a pre-installed base map, 3bar sensor, with logging, wideband o2, a cable for downloading, etc etc etc/

Yes, I will be using it to control my injection & ignition.

I can justify 450 for one ready to go, just not 1500 to 5k :shock: for what others use~

I am budget minded to say the least/

I use a PC2 for my 2000 it controls the fuel and ignition, it just cannot run 4 more injectors as is.

I do know one of the member says he modifies them so you can run 2 in series and control 750cc injectors silk smooth/ (no need for secondaries)

If the megasquirt is as promoted from others, then I will more then likely use it on the 82 GS1100EZ I bought a month or so ago, it is waiting for me in Florida.

Going to make my own injection setup for the 82 GS, but that is some time off from now 8-[

 

[Busafied]

Yes , mine MS is built by Arttu . He has same MS in his turbo GS 1000 .

Looking good Blower- keep up the good fab work \\/

 

[RotaryRodder]

Blower: Where would I get some of those exhaust flanges? I could have some cut out but if someone already makes them it might be cheaper.

 

[Blower]

Blower: Where would I get some of those exhaust flanges? I could have some cut out but if someone already makes them it might be cheaper.

I don?t know . I made mine from 6mm steel plate .

 

[Blower]

I?v been working with rear end , what a fuc** work ! A lot of hammering , bending , grinding and some polishing .
Not ready yet but fairly near .
Allso finished swing arm extensions and hammered those in to swing arm .
Next week I?m going to weld extensions .

 

[katana john]

Nice work..
Realy like the tail section.
And to think I could have got one like that last summer and passed on it.
Think I'll go pin a KICK ME sign on my back and walk around downtown.....

 

[kilroy]

Ok,I can't take it anymore!I have been secretly devoted to this project thread from the start.It's been 3 weeks since the last update.Please feed me(I mean us..) more!...

 

[ramjet]

man that thing rules

well done on all the work

cheers dave

 

[Blower]

Ok,I can't take it anymore!I have been secretly devoted to this project thread from the start.It's been 3 weeks since the last update.Please feed me(I mean us..) more!...

Sorry about that but that EFE is?t only project bike I?ve been working with .
Only thing I have done to efe is battery box/holder . I can put some pics later .

 

[Blower]

Here is pics of battery box and swing arm with welded extensions .

Pic of my home made E-wheel

 

[Planecrazy]

Pic of my home made E-wheel

First off, ALL of it is cool as he11!! I am SOOOO impressed with your work!!!

Second, that (above) is no English wheel ... it's home-made, so that makes it a "Finnish Wheel" !!!

Like many others, I look forward to seeing the project continue to completion!

Best Regards,

 

[80GS1000]

This is a seriously great looking streetfighter. Excellent job, will love to see it when it's all done.

 

[Blower]

Thank you all of your comment?s !
Next thing Im going to make is exhaust muffler . Im going to make it from stainless steel sheet ( 0.75 mm ) and TIG welded .
I have to also make many small things before it?s ready to painter .

 

[kilroy]

Thank you all of your comment?s !
Next thing Im going to make is exhaust muffler . Im going to make it from stainless steel sheet ( 0.75 mm ) and TIG welded .
I have to also make many small things before it?s ready to painter .

Thank You,Blower.Great pics!I like the wheel!That bike looks fast just sitting there!

 

[Blower]

New muffler , made from 0.75 mm stainless steel sheet . It takes two days to made it .
I don?t know should I polish it or not .

 

[Planecrazy]

You are one talented dude!! I like the matte finish of the muffler ... I think it matches the aluminum work better than a polished finish would.

My .02

 

[Blower]

You are one talented dude!! I like the matte finish of the muffler ... I think it matches the aluminum work better than a polished finish would.

My .02

I don?t know if it?s matches better the aluminium work in matte finish .
I?m going to polish all aluminium parts ( not the battery box and the engine) .

 

[Planecrazy]

Well, if you polish the aluminum to a high shine the "polished" stainless steel might work better...

Either way it's looking awesome!

Regards,

 

[Blower]

last week?s progress : installed "new" head light , made palce for the Mini Mega controller box , progressive throttle and a lot of small things .

 

[lecroy]

Do you plan to take the whole thing back apart once you have finished mounting everything, to do the paint and motor work?

Is the motor in any condition to be run with the Mega thing, just to see if things work before the rebuild?