1980 GS250T Service Bulletin ?

[xrider]

Hello,

I am looking for a copy of the Service Bulletin for the 1980 Suzuki GS250T that addresses the clutch push rod seal. I know that one exists from an old thread on here, but I have had no luck in running down a copy at my local dealers. If anyone has a scanned copy it would be greatly appreciated. My clutch push rod seal is leaking and it is the early style with no retaining plate that uses a lip seal pressed in from the inside of the cases. Trying to figure out my best options and would like to see what Suzuki recommended in the bulletin.

Thanks,
Matt

 

[steve murdoch]

I am assuming the Service Bulletin idea came from this old thread?
http://www.thegsresources.com/_forum/archive/index.php/t-153348.html

A couple of the players are still active. Maybe contact them directly.

 

[xrider]

Yeah that is correct. I will try messaging them. I am in pretty much the exact situation. old style lip seal is in there. The case has bosses that line up with the later style bracket, so I will likely go the same route and drill and tap the threads and convert it to the later style seal. Unfortunately I still have to get the old lip seal out of the case.