• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

1980 GS850 GT - ignition timing issue

J

John Eldridge

Forum Newbie
Hi everyone,
My bike won’t fire up after a rebuild. It was previously running (albeit a bit rough).
It’s getting fuel because unburnt petrol is collecting in the exhaust pipes.
I have strong spark on all 4 cylinders.
It backfires so I’m assuming it’s a timing issue.
I’ve re-checked the valve timing
  • The cam chain is properly positioned (20 pins)
  • All valve clearances are within spec
I’m thinking there is a problem with the signal generator.
Does the photo below look right?
In the photo, the T mark for cylinders 2 & 3 is lined up exactly but the arm on the rotor is well past the pick-up coil. Doesn’t this mean the cylinder is firing before reaching TDC?
This would account for the backfiring wouldn’t it?
Resistance across the blue and green wires from the signal generator is 304 Ohms (spec is 250- 350).

Any help would be appreciated, thanks JE
 

Attachments

  • signal generator (Custom).jpg
    signal generator (Custom).jpg
    65.5 KB · Views: 4
You must log in or register to reply here.
Back
Top