• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

1980 gs850gl compression test

  • Thread starter Thread starter ceh3523
  • Start date Start date
C

ceh3523

Guest
I have a dumb question when doing a compression test on 1980 gs850 do you need to ground spark plug wires ?
 
Nope, but I would keep them tucked away from anything flammable...
 
It's generally advised to ground them. The ignitors typically tolerate an ungrounded plug but it won't hurt to hedge your bet.

Before doing a compression test is critical to adjust the valves and put some miles on the bike. Bikes that have sat in long term storage may have sticky rings that loosen up quickly once the bike enters service. And since the valves tighten with mileage, and so many people don't adjust them, it's critical to make sure that is done before hand. Also, the engine needs to be hot and the throttle held open during compression testing.
 
It's generally advised to ground them. The ignitors typically tolerate an ungrounded plug but it won't hurt to hedge your bet.
You have experience with that, Ed? The "ignitor" is just a box of transistors that interrupt current flow through the coils. Whether the coil output is grounded shouldn't affect the load through the ignitor.

Maybe there is something about it that I don't know. :-k

.
 
You have experience with that, Ed? The "ignitor" is just a box of transistors that interrupt current flow through the coils. Whether the coil output is grounded shouldn't affect the load through the ignitor.

Maybe there is something about it that I don't know. :-k

.

Steve, If you are 100% sure that the plugs don't need to be grounded I defer to your knowledge. I was a little unsure so I take and recommend the conservative approach.
 
This question is interesting. I take the view that if high voltage finds route 1 is not available it will look for an alternate and that could be undesirable.
I have heard advice about modern cars that this could damage the ecu.
On balance I would disconnect the coils if only to prevent zapping myself.
 
Steve, If you are 100% sure that the plugs don't need to be grounded I defer to your knowledge. I was a little unsure so I take and recommend the conservative approach.

Not sure if I could assign a percentage of confidence here, have just never worried about it. Actually, never even thought about it. :oops:

It certainly would not hurt anything to ground them, but now I wonder if something nasty might happen if you don't. :-k

Hey, Posplayr, you have any input on this?

.
 
Back
Top