1981 GS1000 Carbs

[Diablo1982]

I just recently bought a 1981 Gs1000, I am really locate a set of carb's for it, i am striking out on locating them, can anyone out here help me out, kinda on a tight budget as well

 

[Diablo1982]

will gs1100 carbs fit on the gs1000?

 

[Guest]

Yes
The sixteen valve has a smaller main air jet so you probably won't run the stock main jets.

 

[Diablo1982]

Cool because i got a gentleman up here in KCK that's offering to sell a set of carb's of a gs1100 and he said that they might fit, i wanted to double check this is my first big gs model i have owned

 

[Nessism]

Did you not get a set of carbs with the bike?

 

[Diablo1982]

I sure didn't. I am trying to hunt them down and a gas tank, and complete headlight assembly to. What all do i need to the carbs so i can install them?

 

[BassCliff]

Hi,

The GS1000 and GS1100 both use BS34SS carbs (1980+). But you will have to jet them for your bike. Check my website for the stock jetting chart. You should also replace the intake boots and O-rings. You should probably do a complete rebuild on the "new" carbs, dip them, and install an O-ring kit from http://cycleorings.com.


Thank you for your indulgence,

BassCliff

 

[Diablo1982]

where can i get replacement intake books, for the carb's to install onto the motor, I am gonna possibly run pod filters upon it because i cant locate a air filter box at all anyplace

 

[rapidray]

You can get the intake manifolds & orings from any Suzuki dealer. Ray.

 

[SqDancerLynn1]

You can get the parts from Z21enterprizes.com or check Basecliff's site for the many links to part vendors. If you go to pods you will need to get a jet kit !!

 

[BassCliff]

where can i get replacement intake books, for the carb's to install onto the motor, I am gonna possibly run pod filters upon it because i cant locate a air filter box at all anyplace

Hi,

Check out the vendor list in your "mega-welcome". If you didn't bookmark it, CLICK HERE.


Thank you for your indulgence,

BassCliff

 

[Diablo1982]

i greatly appreciate all the warm help and knowledge that you all are sharing with me, i will forever be in debt to you!

 

[Guest]

i greatly appreciate all the warm help and knowledge that you all are sharing with me, i will forever be in debt to you!

Forever is a real long time.

 

[Diablo1982]

Chef i heard that u have a plug that u would pull out of a dead carb for the carbs i am gonna buy from tkent02?

 

[Diablo1982]

simply amazing

 

[Guest]

simply amazing

I'm going to hack up a carb body tomorrow for fun.

 

[blowerbike]

I'm going to hack up a carb body tomorrow for fun.

sometimes when i have removed the float bowl...the plug stuck to the gasket and the gasket to the bowl.
beat the carb body on a piece of wood before you get the grinder out.

 

[Guest]

sometimes when i have removed the float bowl...the plug stuck to the gasket and the gasket to the bowl.
beat the carb body on a piece of wood before you get the grinder out.

I've had them fall out and some welded in.
Weird

 

[tkent02]

The bike that had these carbs on it, the plug was just gone. Dunno where it went, the plug can't fit through the hole into the venturi.
It was blowing so much fuel smoke, the PO thought it "Blew a ring"
That's pretty weird, too.

 

[Diablo1982]

Awesome, well Tkent02, we are deifnatley getting the carbs from you, and chef what do u want for the plug , Yall are really knowledgeable, now hopefully the retard i bought it from will bring my tank to me, since he forgot it at his daddies house, if not hunting that part next, thank god for my bottle feeder to start this puppy