1981 GS1000G wheels front and back fit 1984 GS1100G

[clancey g]

looking at buying a set to put new tires on (they on eBay), will these be the same and fit my bike, my front rim has fair few marks and previous owner had put anti flat fluid in there making a mess and a slow leak in front. spare set with new tires would be worth while I'm thinking, thanks clancey, getting there slowly, few more small jobs to do.

 

[john82q]

Not Sure

Not Sure

hi,

I am no guru, and for sure one the real gurus will answer in due course, but I think your right to be cautious.

I looked up the part numbers for rears and there possibly slightly different in some unkown way;
gs1000g(81) 64100-45810-12U
gs1100g (83) 64100-49810-291

I assumed the wheels were all the same, when I brought a rear for my car tyre project. (outfit) turns out the wheel I got from another model had a 1/2 inch different width in the hub, fits the drive fine, but is off set.

If it does pan out for you, do you want to sell your old 1100 rear wheel?
(I dont care what the rims like I just want to cut the hub out)

 

[Guest]

Hey Clancey, totally off topic but I knew there was another Brissie member I missed! We had a big run Sunday week ago with all the GSR members around South East Qld and went from Archerfield to Landsborough the long way, so sorry I missed you out on the invite.

Keep an eye out in the GS Meeting Place forum for next time if you're keen as it was a good success and I reckon we'll be doing another one in a few months...

Here's the thread from the other day:

http://www.thegsresources.com/_forum/showthread.php?t=185926

 

[Nessism]

I'm pretty sure the wheel will interchange. Some of the early wheels were tube type, some tubeless so look close. The later front was a little wider too.

 

[clancey g]

thank you all, i took a punt for $60 and purchased them both, pick up in bris once he gets back to me. if not ill have some to throw around also 2 other rear wheel on eBay ATM one is a wire wheel. Pete, thanks for thoughts still been getting it sorted had a few curve balls that had me tracking off on tangents for a bit,the ride looks awesome and bikes very nice . ill get some miles on her when i get it sorted and ease into it. regards clancey.

 

[Guest]

thank you all, i took a punt for $60 and purchased them both, pick up in bris once he gets back to me. if not ill have some to throw around also 2 other rear wheel on eBay ATM one is a wire wheel. Pete, thanks for thoughts still been getting it sorted had a few curve balls that had me tracking off on tangents for a bit,the ride looks awesome and bikes very nice . ill get some miles on her when i get it sorted and ease into it. regards clancey.

Good stuff Clancey! Definitely have to remember to get you an invite to the next one as well.

Good luck with the wheels!

 

[TheCafeKid]

I'm pretty sure the wheel will interchange. Some of the early wheels were tube type, some tubeless so look close. The later front was a little wider too.

They'll swap... With some work. Your gonna want the rear sPacers and rotor from the 1100G. They're not the same. The later shaft rotors were some sort of semi-floater type that had no webbing and mounted directly to the hub...

 

[Guest]

Also not sure but the 81 has a 17" rear and I believe the 84 has a 16" better check for sure though

 

[clancey g]

small late update, thanks again every one. I got them they need a clean up and look narrower on front possibly, then i can read numbers on rims. The gent that had them is a member here , small world , he was brilliant very helpful. Also john82q the back wheel i picked up you may have to play with if you want, im in sunnybank hills, cheers clancey

hi,

I am no guru, and for sure one the real gurus will answer in due course, but I think your right to be cautious.

I looked up the part numbers for rears and there possibly slightly different in some unkown way;
gs1000g(81) 64100-45810-12U
gs1100g (83) 64100-49810-291

I assumed the wheels were all the same, when I brought a rear for my car tyre project. (outfit) turns out the wheel I got from another model had a 1/2 inch different width in the hub, fits the drive fine, but is off set.

If it does pan out for you, do you want to sell your old 1100 rear wheel?
(I dont care what the rims like I just want to cut the hub out)

 

[john82q]

Clancey,

I got your PM but the system tells me your settings wont accept PMs ?

Short of it is I will give you a ring tomorrow, about having a look see at the wheel on the weekend.

Cheers John

 

[clancey g]

ok ,some setting there wont let me accept pm's idk why. talk to you then, clancey.
"changed message setting try now "

Clancey,

I got your PM but the system tells me your settings wont accept PMs ?

Short of it is I will give you a ring tomorrow, about having a look see at the wheel on the weekend.

Cheers John

 

[Guest]

Glad to see you got your wheels Clancey! And good to see John might get to fiddle with his car tyre conversion finally

 

[clancey g]

ok thanks, we will see on sunday as i dont know enough about the wheels yet to give him more info, John will though, hope fully they what he's after, im still standing back looking at my new shiny front tire , clancey.

Glad to see you got your wheels Clancey! And good to see John might get to fiddle with his car tyre conversion finally

 

[Guest]

ok thanks, we will see on sunday as i dont know enough about the wheels yet to give him more info, John will though, hope fully they what he's after, im still standing back looking at my new shiny front tire , clancey.

Good stuff, new tyres are always good What did you get on there?

 

[clancey g]

New Front tire is a metzeler lasertec 100/90-19 m/c 57H (19681) 75-r 0054191, i made a post in this section with all rim info for my wheels, i was up to 5.30am sorting tools messing around an getting things sorted, sort of , regards clancey.

Good stuff, new tyres are always good What did you get on there?

 

[Guest]

Haha 5:30am? You're keen! Good to see

I've heard the Lasertecs are good...