4 into 1, who's best

[Tom MLC]

Most definitely! Last year at Street Vibrations, I went heads up with Tom MLC on the dyno drags (his bike was stock back then). I was beating him by a full second in the 1/4 mile.

Yeah, but I'm ready for a re-match!

 

[Smooth Operator]

What about getting to the oil filter?

 

[Bert Patterson]

What about getting to the oil filter?

The V&H retains access to the oil filter. I had a Kerker on before and got rid of it just because of the pain of removing the exhaust everytime the oil was changed.

If you have an aftermarket oil cooler, changing the filter will be a huge, especially if you have big hands, but you can do it with the header on.

 

[Tom MLC]

What about getting to the oil filter?

Changing the oil filter is not too bad with the Jardine. Small hand would be helpful. I use half a milk carton between the header pipes, stuck under the filter cover to keep the oil off the pipes. Works very well.

 

[Road_Clam]

You won't find my exhaust in any catalog, as I built it myself. It's a MAC header with a custom fabbed mid pipe, and a D&D race canister from a '97 ZX7R Kawasaki:

 

[t3rmin]

You won't find my exhaust in any catalog, as I built it myself. It's a MAC header with a custom fabbed mid pipe, and a D&D race canister from a '97 ZX7R Kawasaki:

I was thinking about doing something like that. LoudFastUgly has these:
http://www.loudfastugly.com/exhausts/supertrp.htm

Thought I could find a Harley pipe or whatever then take it all to the local muffler shop to hook 'em together. Is yours welded or what? Was it fairly easy?

*edit* LoudFastUgly has a "GS700-750E/ES/S 83-86" megaphone to fit that "GS750/1100E-ET 80-82" header. So header ($109) plus megaphone ($89) equals 4-1 exhaust for $200 from LoudFastUgly. Best price I've seen. Any idea if the routing/mounting on a muffler/pipe for a '83-'86 would work with my '80 bike???

 

[Road_Clam]

Thought I could find a Harley pipe or whatever then take it all to the local muffler shop to hook 'em together. Is yours welded or what? Was it fairly easy?

Heres how I fabbed my exhaust, it was fairly straight foreward. I do CNC machining for a severe service pump manufacturing company so I have all types of custom fabrication and welding right at my disposal..
http://www.thegsresources.com/_forum/showthread.php?t=85511&highlight=Road_Clam

 

[GS Farmer]

exhaust

exhaust

I bought both a Jardine, and Mac pipe last winter for a 1000G. After looking them both over , I installed the Mac because access to the oil filter was much better!! I used to run Kerkers 20 years ago, and the Macs are similar in the oil filter access area. The pipe fit well, and no problems in 3000 miles. I did coat the inside of the pipe with Kreeme blue shield, and would never put another one on without doing that. In the rejetting process, I know I have run the bike on the lean side, but absoulutely no blueing or disclouration. It is an excellent product if properly applied. Follow the instruction about cleaning before application.

 

[kartin]

I have the Jardine (sames as the 3rd post in this thread) but found it a bit loud for my tastes so I bought a GSXR1000 end can + midpipe from Craigslist and grafted that on to the Jardine header pipes. Sounds and looks good!

 

[KGB]

I've had both V&H and Kerkers on my 1000S.

Jetting for both was different.

The chrome on the V&H seems cheesy compared to the Kerker.
I've had the V&H 2 maybe 3 years now and it's showing rust.
The Kerker only showed dings.
I may need to re-pack the Kerker.

 

[80gs1000e]

V&H pipe + DJ Stage III kit + K&N Pods + Accel Coils + Progressive suspension transformed my bike.

Best looking pipe I've seen is that Motad 4 into 1....