• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

80 GS850 Starting problem: Igniter or other?

  • Thread starter Thread starter erconn
  • Start date Start date
E

erconn

Guest
I can't start a 1980 GS850GX. Unplugged each ignition and voltage drops from around 11 when the key is on to around 9 when starting. New spark plugs don't fire when taken out. Could it be that both ignitions went bad at/around the same time or is there something else I should look for? Thanks in advance!
 
First, voltage is a huge issue. If you are not getting enough voltage to the coils, the coils won't produce enough voltage to fire. Charge the battery for a couple hours until you have at least 12v, preferably a little higher. Then try your test again.

If you still have no spark, check that voltage is actually getting to the coils. If you have voltage at the coils, coils or plug wires might be bad. If no voltage to coils, test the igniter (search the forum for that one) and points.

Good luck:-D
 
The battery is charged and it's only a few months old. All the voltage I talked about getting is at the connection to the ignition coils. I hooked up the charger and put it on 55 amp start. Voltage at that connection is more than 13 before starting, then drops to more than 10 when starting. Again, no spark from either coil.
 
Last edited:
Sounds like you need to do the resistance test on the coils and plug wires/caps. Or you could take them to the dealer to have the coils tested.
 
erconn said:
I hooked up the charger and put it on 55 amp start. Voltage at that connection is more than 13 before starting, then drops to more than 10 when starting. Again, no spark from either coil.
Click to expand...

Don't do that again. If you got lucky and didn't fry anything you might not be so lucky again. :shock: :shock: You can jump your bike from the car battery if the car engine is not running but don't use that charger.
 
I'm no expert in electronics but I greatly improved my voltage to the coils, by just going through the bike and cleaning connections. On 850's the ground that is screwed into the battery box is especially suspect. Clean it good or make a better ground somewhere else.

I went through other connections at the handlebars (starter switch/run switch), ignition solenoid, etc. Gained a volt and a half to the coils.

Good luck.
 
Hi

Feed the coils via a relay.Use the original +wire to trig the relay.
 
this should work well....

this should work well....

GS850_Coug said:
Wouldn't you need to readjust the timing, as the relay activation would add a slight delay to the firing of the coil?
Click to expand...

No the relay stays closed the whole time the ignition is on....
 
You must log in or register to reply here.
Back
Top