'81 1000G Valve Shim stuffs

[reddaxe]

So, I'm new to the GSResources and I've got this '81 1000G I've been going through and it would be great to get some general valve clearance info, ie. proper clearance numbers, where to buy shims, etc.
Any info would be absolutely fantastic! Thanks.

 

[Steve]

The clearances are easy. 0.03-0.08mm for intake and exhaust. The METHOD for determining clearances is just a little more involved.

Allow me to give you the keys to "the library". ( <-- click link)

Once there, look down the center column, you will find a link to a service manual for your bike.

If you scroll down the left column, just below the first picture, you will see a link to a tutorial for valve adjustment.

There is no real need to purchase shims. Determine what you will need, then contact the GSR Shim Club. Ray will send you what you ask for, then you send back what you took out, along with any extras you might have ordered (just in case), as well as a small donation to further the cause.

If you feel you need to start your own collection, Z1 Enterprises has the best prices, but don't buy any before you know what you will need. Also be aware that you will always need thinner shims next time.
Since you are getting into the valves, feel free to take adantage of the offer in my signature.
It helps with calculating the shim sizes you will need, and provides a summary page to log all your service.

.

 

[reddaxe]

Awesome!! Thanks so much! I really appreciate the help! Maybe when I'm finally done working on this thing I'll upload some pictures. She's a little ugly but still pretty cool.

 

[gustovh]

Charlie G is not too far from you should you get stuck on something.

V