• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

82 gs 550 carnk spinning problem

  • Thread starter Thread starter hmeric7
  • Start date Start date
H

hmeric7

Guest
hey guys just got the bike and was going through doing osme preliminary checks. just worked on rebuilding the carbs put them back on then went to start it. its been sittin a long time and i took the points cover off or pick up covers and turned the bike over with that a few times to make sure it wasent siezed up and it moved freeley to i cranked on her and just a got a spinning sound coming from the stator side. i pull ff that cover and ii see that the big sprocket behind the stater magnet is just spining on the shaft it didnt do this at first but then started after i tried cranking on it so now when i crank on it the starter spins the little sprocket which in turns spins the crank sprocket which i wold assume turns over the motor, any esyd y would that sprocke tspin freely shold it be fixed on the crnak
 
well if i take a socket and turn it i can turn it eather way but the sporcekt behind the the magnet just free spins i can spin it by hand it aint catching on anything
 
the starter clutch? the starter will spin i took off the side cover and the starter will turn spinnin the litttle double sprocket which turns the big sprocekt on the crank. the sporkcet on the crnak just free spins not the starter
 
Their are three bolts holding the starter clutch to the Rotor, they are most likley broken
 
k ell what would cause this and does it happen often or just a freak occurance
 
You have to take that rotor off the end of the crank and either tighten it back down or get another starter clutch. If the whole rotor is spinning on the end of the crank a tetourque will work. If the bolts are sheared off you need to replace them.
Go to mrcycles.com and look at a mirofiche of the starter clutch off your bike.
 
Back
Top