C
catfishjn69
Guest
figure this would be the place to start so here I go. I decided to restore my dads old 850. he bought it new in 84 for around $2200. the only reason he bought it was to show my step mom that he could. yeah they are still married. I have ridden bikes from the time I took the training wheels of my bicycle till I got out of college and started to get the urge again now that I tuned 50. so back to the bike it has been sitting since about 1987 in the garage, at that time dad had the carbs rebuilt by someone? So about 2 years ago I went and got the bike. right now it has around 800 miles on it. it still has the initial service sticker on the gauges.
So here I go with getting this thing back on the road. I have drained the gas (he did have stabil in it) and the tank doesn't look bad. of course I had to start it (got it to sort of run). but as you can imagine the float on carb one was stuck so fuel ran out of the air box.
so here are my plans:
got a new key made(he couldn't find the original)
rebuild carbs(ordered o rings and have to order float bowl gaskets)
also ordered the fasteners and o rings for the intake
new air filter
new oil filter(change oil)
new tires(these still have the nubs on them but majorly dry rotted)
go through the brakes
buff out the tank somehow he got some kind of splatter on it in the garage.
then see what else pops up
I have seen posts about factory manual when I click the link I get crazy numbers page) so open to suggestions on finding one
any suggestions for best place to get parts
not sure if I am going to keep this or not but it is growing on me
thanks
Jeremy
So here I go with getting this thing back on the road. I have drained the gas (he did have stabil in it) and the tank doesn't look bad. of course I had to start it (got it to sort of run). but as you can imagine the float on carb one was stuck so fuel ran out of the air box.
so here are my plans:
got a new key made(he couldn't find the original)
rebuild carbs(ordered o rings and have to order float bowl gaskets)
also ordered the fasteners and o rings for the intake
new air filter
new oil filter(change oil)
new tires(these still have the nubs on them but majorly dry rotted)
go through the brakes
buff out the tank somehow he got some kind of splatter on it in the garage.
then see what else pops up
I have seen posts about factory manual when I click the link I get crazy numbers page) so open to suggestions on finding one
any suggestions for best place to get parts
not sure if I am going to keep this or not but it is growing on me
thanks
Jeremy