• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Air box boots.

Steve

Steve

GS Whisperer
First item:
I got new boots for "Freebie" (see sig), and am now trying to install them. The boots that came out were all the same part number (thanks, some previous owner) and had no markings for L or R. The new boots are marked L and R, so that is no problem, but does the L and R go UP or DOWN? There is also a little teat molded into the edge near the letter that is visible when the boot is in place, so it's easy to see when installed.

Second item:
The boots I took out had a metal ring inside that would lock them into place. There wasn't much problem getting them out, but how do I get them back into the new boots? There are no ridges inside the boots to tell me where they should end up, and I can't tell if they should be installed within the opening in the airbox or just behind it. Either way, it will expand and hold the boots in place, but I am having a rather difficult time trying to get them into either location.

Any tips on how and where to install these rings will be fully appreciated. :D


.
 
Last edited:
Hey Steve,

I believe the L & R are supposed to be in the UP position...

After I've installed the bank of carbs into both sets of boots (fuel & air sides) I simply grab hold of each boot & rotate it around until I acheive the best fit "angle" on both sides of the boot. Sounds funky, but you can easily see right away when each boot is in the correct position. Then i tighten all the clamps.

Can't help much with metal ring issue - I did just buy some new airbox boots for my 1100EX, but chose to use pods instead so i never installed them.
 
OK, who swiped my sig line?
cus.gif
censored.gif


OK, it's back.
run1.gif


.
 
Mine also has those metal rings in them. But one is missing. I'll be watching this post for the answer on how to install them.
 
NOBODY??? :confused:

After reading all the suggestions to "change your airbox boots", I just know that at least ONE of you has changed them. How about some clues here? :pray:

.
 
Steve, I tried to take a look at my '80 last night to help you. I pulled the air filter out and removed one of the carb boot clamps. I didn't see any markings on the boot, so quite possibly the factory boots are devoid of any markings.

when I get home tonight, I will have a second look at the boot(s) with a mirror.
 
Those little metal rings are a pain to keep in place while wrestling the carbs in. My airbox boots do have a depression where they are supposed to stay, however, the depression is very subtle and doesn't do a good job of keeping them in place. If the band isn't strong enough to stay in place on it's own, how could it possibly help hold the boot ?

I'm not convinced that they are completely needed. The boots should have a groove where they connect to the airbox which holds them there fine. I guess new metal bands that have more spring to them would help.:)
 
rustybronco said:
I didn't see any markings on the boot, so quite possibly the factory boots are devoid of any markings.

when I get home tonight, I will have a second look at the boot(s) with a mirror.
Click to expand...
The boots I took out have Suzuki part numbers on them. I looked them up and they are the correct boots for ALL of the 850L models ('80-'83) and the '82-'83 G models. The '80 and '81 G models had different part numbers, and they also specified Left and Right, so there were two each of two different part numbers. Since "Freebie" is an '81, I ordered the correct ones, I did not just copy the part numbers that were there. Other than the part number, which is on the side of the flange that faces the carbs, and a little teat molded into the edge of the flange that mates against the airbox (directly opposite the part number), there are no orientation marks.


Larry D said:
Those little metal rings ... I'm not convinced that they are completely needed. The boots should have a groove where they connect to the airbox which holds them there fine. I guess new metal bands that have more spring to them would help.:)
Click to expand...
I finally found a way to compress the metal rings enough to get them into place. There is NO question that they will hold the boots in place, I just want to make sure that's the position I want them held in.

Yes, there is a groove where they connect to the airbox, but NEW boots are so pliable, if you look at them cross-eyed, they will fall out of place. :eek:
They really need to have the metal rings to hold them in place.

.
 
Steve said:
The boots I took out have Suzuki part numbers on them. I looked them up and they are the correct boots for ALL of the 850L models ('80-'83) and the '82-'83 G models.
Click to expand...
Shall I look at my '82-g, or do you have it handled now?
 
rustybronco said:
Shall I look at my '82-g, or do you have it handled now?
Click to expand...
Thanks, Rusty, I think it's handled, I'm just going to go with the way I have them in now. I have the letters facing up and I found a way to compress the metal rings to get them in place, so I will try to install the carbs and see what happens.

If it doesn't work, look for updates right here. :D

.
 
You're talking about the rings that fit inside the outer carb boots next to the snorkel, about 5/8" in span and 1 1/2" diameter? They are a real mess to put in. My tubes were old with a rubber dent in the boot to put them in, so at least they had some quasi-home. But they still squished around and would not stay in any particular spot. The key seemed to be dry out the internal tube, don't have any lubricant inside the tube (and the metal ring itself). Push them in carefully with a screwdriver, then mount and screw them down. Hold your breath and hope you don't have to do it again.
 
Well, I only had two hands available :eek: and they were busy, so I couldn't take any pictures, but here is how I put the rings in.
Grasp the ring by encircling it with index finger and thumb. Squeeze it into a tighter, smaller circle, Grab the inner end with some needle-nose pliers and help it get a bit smaller. Now grab the overlap with the needle-nose pliers, lift the ring into the boot and carefully let it expand. Carefully slip the pliers out, the ring will expand into place. :D

.
 
Those rings can be a pain. After wrestling with them for a while I found putting a little oil inside the boot, compressing the ring so the ends overlap then slipping the opposite end in first I was able to get the ends to slip in and aligned with the help of a screwdriver. Took a while but finally got them set. There was a slight indention inside the boot where the rings seated and a dot on the outer ring of the boot that aligned with a dot on the airbox or at least that is how I assumed they were to be aligned. Worked for me, just like anything proper lubrication (oil & beer) and a little patience gets the job done.
 
You must log in or register to reply here.
Back
Top