crazyramen
Forum Apprentice
Getting near the end of my build and getting rid of some OEM parts that I'm not reusing.
Pics here: https://imgur.com/a/750-parts-PmPpZEe
The Air Box looks pretty good externally, but the crankcase ventilation area is totally rusted through. There's a hole poked in the plate that prevents it from dripping straight onto the filter. I decided it wasn't worth the effort to plug it all up, and just went with pods.
I did buy a new OEM style UNI air filter for it before I realized though, so I have that oiled with the filter frame as well.
I have some OEM valve shims I pulled off of it as well. I confirmed that the widths were as printed on them with a mic.
Sizes are:
2x 2.75
5x 2.80
1x 2.85
Lastly I got a set of carbs. Not sure what bike the jets and stuff were originally off of, since I got them off ebay. The two middle carb bodies are not usable, since they were what I was replacing. One had the float mount JB Welded (which has failed), and another had the fuel screw break off in the body.
All the chokes seem good.
Only 3 floats, idle fuel screws, slides, and jet needles, 4 each of all the other jets.
Jets are as follows:
Main: 100
Needle Jet: 250 O-6 *(not sure what this style is, they're much taller than the 258 O-4 that came in my bike)
Jet Needle: 5F21
Pilot: 15
Float: 203
Can included more pics of anything
Not looking for a lot of money for these, I'd just rather get parts to people who would use them rather than throwing them out.
Make an offer on any or all of it. Buyer pays shipping.
Pics here: https://imgur.com/a/750-parts-PmPpZEe
The Air Box looks pretty good externally, but the crankcase ventilation area is totally rusted through. There's a hole poked in the plate that prevents it from dripping straight onto the filter. I decided it wasn't worth the effort to plug it all up, and just went with pods.
I did buy a new OEM style UNI air filter for it before I realized though, so I have that oiled with the filter frame as well.
I have some OEM valve shims I pulled off of it as well. I confirmed that the widths were as printed on them with a mic.
Sizes are:
2x 2.75
5x 2.80
1x 2.85
Lastly I got a set of carbs. Not sure what bike the jets and stuff were originally off of, since I got them off ebay. The two middle carb bodies are not usable, since they were what I was replacing. One had the float mount JB Welded (which has failed), and another had the fuel screw break off in the body.
All the chokes seem good.
Only 3 floats, idle fuel screws, slides, and jet needles, 4 each of all the other jets.
Jets are as follows:
Main: 100
Needle Jet: 250 O-6 *(not sure what this style is, they're much taller than the 258 O-4 that came in my bike)
Jet Needle: 5F21
Pilot: 15
Float: 203
Can included more pics of anything
Not looking for a lot of money for these, I'd just rather get parts to people who would use them rather than throwing them out.
Make an offer on any or all of it. Buyer pays shipping.
