S
SAN
Guest
hello............
I was wondering if anyone recently or ever
have bought a new dyna S ds 3-2..........
and have the bike run on two cyl ,or not at all.
I put a new dyna S in last yr, cured a 5.000 rpm
break up(like hitting rpm limitter)ON my 81 550T.
A screw backed out of kill switch top plate that
holds O/W & O,wires. The O/W wire had a slice
1/4 inch long from insulation touch screw,touch,
handle bar. blew coil relay fuse, ign fuse.until
I found the short. lost 2,3 cyl . First.while trying to
find problem tested every thing. Did not believe this
could hurt dyna.But i had batt voltage coming out of
dyna w/magnet at 12 noon both sides of dyna.Bought
new dyna S. Box was taped w/2 different styes.no biggie.
Also the BL&WH wires had pink male round end's.not crimped
but sqwashed w/pliers. put all on 30 min ran only on 1,4.????
2.8 volt coming out of 2,3 module. brought back to store
he called dyna asked them to send a new one but they are all out. waiting
for resupply being made right now he said.but store owner didnt buy story because the store P---- U--------, had all kinds. Did they have a bad batch, Thats my Guess. Ill find out in two weeks. So i put old ign in didnt even turn over before it started.rideing now. gust dont go above 5.000rpm. Any one recently or ever have a bad new Dyna S. thnk you. SAN
I was wondering if anyone recently or ever
have bought a new dyna S ds 3-2..........
and have the bike run on two cyl ,or not at all.
I put a new dyna S in last yr, cured a 5.000 rpm
break up(like hitting rpm limitter)ON my 81 550T.
A screw backed out of kill switch top plate that
holds O/W & O,wires. The O/W wire had a slice
1/4 inch long from insulation touch screw,touch,
handle bar. blew coil relay fuse, ign fuse.until
I found the short. lost 2,3 cyl . First.while trying to
find problem tested every thing. Did not believe this
could hurt dyna.But i had batt voltage coming out of
dyna w/magnet at 12 noon both sides of dyna.Bought
new dyna S. Box was taped w/2 different styes.no biggie.
Also the BL&WH wires had pink male round end's.not crimped
but sqwashed w/pliers. put all on 30 min ran only on 1,4.????
2.8 volt coming out of 2,3 module. brought back to store
he called dyna asked them to send a new one but they are all out. waiting
for resupply being made right now he said.but store owner didnt buy story because the store P---- U--------, had all kinds. Did they have a bad batch, Thats my Guess. Ill find out in two weeks. So i put old ign in didnt even turn over before it started.rideing now. gust dont go above 5.000rpm. Any one recently or ever have a bad new Dyna S. thnk you. SAN
