• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Backwards L model forks?

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
Has anyone ever tried turning around the L model forks , so that the leading axle is behind... so that you have more trail and more stability? I'm putting a 16' GS1150 wheel on my '81 GS1100E, and it was suggested that this might increase stability and compensate for lowering. Any ideas? Thanks much.

Austin
 
Thanks for the warning, I'll definitely be careful. I'm wondering, though, if anyone else has any ideas about this, or if anyone has ever tried it. Let me know. Thanks.

Austin
 
It will screw up the handling of the bike, do to the caster that will give the front wheel. Not sure what will happen, or how drastic the effect would be, but if you do it, take it slow and figure out what it does.
 
Between the 16 and the geometry change it is going to steer considerably quicker. Whether you go too far with it is hard to say. If the fork tubes are able to be raised and lowered in the triple clamps it might be worth trying. Just be careful until you see if it handles without anything too quirky going on.
 
I wouldn't even try it. I am putting my 79 1000L back together and wasn't paying attention. I accidently put the whole front end back together with the forks on backwards. I went to install the brake calipers and neither of them fit. No matter what combination I tried there was no way they were going to fit. Just a little experience I had.

-Tom
 
Re: Backwards L model forks?

austinfd said:
Has anyone ever tried turning around the L model forks , so that the leading axle is behind... so that you have more trail and more stability? I'm putting a 16' GS1150 wheel on my '81 GS1100E, and it was suggested that this might increase stability and compensate for lowering. Any ideas? Thanks much.

Austin
Click to expand...

I'm not too sure that this is a good idea. Besides affecting how the bike straightens itself out after a turn, you might be setting yourself up for a nasty oscillation at speed, which could cause the dreaded and dangerous 'tank-slapper,' or speed-shimmy. Anyway, this isn't going to do much to the height of the bike, and that's why you said you wanted it to do in the first place. This could also adversely affect brake performance (although unlikely), because if you can even get the brakes on at all, how they sit on the bike is going to be very different. The brake lines might also end up someplace screwy. The more I think about this, the worse an idea it seems to be. It's your bike though, please do let us know how it plays out.
 
Thank you all for your advice, and moreso for your concern. I assure you all that I will be very careful in my testing of the new steering geometry. If anyone knows how to calculate the steering geometry mathematically then please let me know. In the absence of that, I plan on cautiously trying out this new configuration. I have managed to fit the forks, wheel, and calipers adequately, and am just waiting on a straight front axle; IF ANYONE HAS AN 1150 FRONT AXLE IN GOOD CONDITION, OR KNOWS WHERE TO GET ONE CHEAP, PLEASE LET ME KNOW. I will test my new front end out under various conditions regarding speed, accelertation, turning, and braking. I will definitely make a report back as to how it handles. I am excited, and will post as soon as I take it for a ride (if I make it back... :). Thanks, again, for the input, and please offer more if you like. Take care.

Austin
 
You must log in or register to reply here.
Back
Top