M
Mercaholic
Guest
I tore into the carbs off a newly acquirted '83 Katana 750 and noticed that there are three tee connections, one being for the fuel line. The two others did not have anything connected to them. The vacuum line from the petcock was properly connected too
I seem to recall that gas tanks that had a fuel guage sender needed to be hooked to one of the tee connections but this model has no such guage.
Shouldn't the two open tee connections be connected to something and if not, should they be plugged?
I seem to recall that gas tanks that had a fuel guage sender needed to be hooked to one of the tee connections but this model has no such guage.
Shouldn't the two open tee connections be connected to something and if not, should they be plugged?