• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Carbs cleaned up and installed. Hose question

  • Thread starter Thread starter jprice90
  • Start date Start date
J

jprice90

Guest
Quick question about the hoses on, I think carb #2 and #4? I'm pretty sure they're breather hoses or something along those lines because I remembered where the petcock vacuum was along with petcock fuel line
 
On the rear top of #2 ( from left to right as you sit on the bike ) is a nipple..that one goes to the petcock. Fuel tee is obviously between 2 and 3. The others are vents that are not capped off. Depending on the air cleaner system, you will run the vent hoses over the top outer edges of the stock box and down the back..putting the hose between the tranny and swing arm.

If pods..then just run them down between the carbs and between the tranny and swingarm. trim them off about 1 inch below the bottom of the oil pan.
 
I would never run pods.
I believe these hoses are off of the fuel tees. So they're just vents?
 
Should be only 1 fuel tee that lets fuel to the carbs. The other two should be vents. Post a picture of what you have now so we can better help please.
 
Lets try this ...

the fuel tee from the tank to the carbs is between carbs 2 and 3 down near the rim of where the bowls bolt on.

The other two black plastic nipples are between 1 and 2 and between 3 and 4 up higher than the lower fuel tee is. These are vents.
 
Back
Top