• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Carbs spitting fuel after rebuild?

  • Thread starter Thread starter lance_l
  • Start date Start date
L

lance_l

Guest
Have a question to why my carbs would be spitting fuel from the Air jet on the air box side of the carbs? The carbs were just fully rebuilt (pulled apart and dipped for 24hrs per the rebulid manuel). All new o-rings, new intake boots and o-rings.

Little history on the bike. Got it last year for free from a guy I worked with. The bike had been sitting for about 5yrs in doors. Put new battery and fresh gas in it and got it fired up and running but never real well. the low RPMs were always alittle tricky. Finally got time to pull and rebuild them the last couple of weeks.
When I put them back on the bike started right up and ran better then I have ever heard it run. Put the airbox back on did some minor adjusting and took it for a ride to buddies house. Got there and parked it and noticed fuel leaking out of the airbox. Pulled the airbox off and started it and noticed it spitting fuel from the airjets. What would cause this? Its only on carbs 1&2.

Thanks
Lance
 
Mu guess would be float heigths or bad float needle/seats not seating with each other properly. Rubber tipped needles?? Check for groves worn in the rubber tips if so.
 
Could be the floats didn't have a caliper to set them with and wasn't really having this issue before. The foat needles didn't have rubber tips on them and they looked good. Bike only has about 15k-20k on it.
 
Got a buddy with a set or a harbor freight close by?? about 20.00 for a decent set..good enough for carb work anyways. And be sure to set both floats in each carb...
 
Yeah have a buddy how has all the correct tools to do all the adjustments and sync on the carbs. but his a coulpe hours away and well be taking it up to him this weekend and having him look them over and do the sync for me...

Thanks for help and kind of verify what my thoughts were on it. Been reading thought the site the couple of months and you guys are very helpful...
 
Yeah it is. Not real good on carbs. been awhile since I've played with them and then it was automotive ones which are a little different. Thank for your input Chuck
 
Mine did the same thing after my rebuild. No's 1 and 2 puking gas into the airbox. I pulled the carbs and the floats were about 2mm too high. Not much but enuff to cause the problem. I reset them all and now all is good. You cannot eyeball them and think it's close enuff.
 
Ok an update on my issue.
I had the float height set and got the bike back last friday. Took it for a ride on saturday. Rode about 50-75 miles mostly interstate and highway. Get to the first stop and was noticing some cutting in and out about the last 5 miles. Stop and notice gas puoring out of the air box again. Just talk with the guy the has it and seems like the needle and seat for the #1&2 are bad.
 
check the float level wet, before you remove the carbs.
check again wet before you reinstall the carbs.
If the needles are steel and the seats are brass, you can "re-seat" them with a very small hammer or reasonable facsimile.
 
Floats have all been been checked and double checked and then checked again. The bike is at a shop where an old school metric going is going over them and found the needle and seats in #1 & 2 are bad. So have them on order.
 
Check the spark plug boots.
If you don't have a consistent spark it will push fuel out of the cylinder back into the air box.
 
If this doesn't work that well be my next step. I trust what this guys is saying. The first time around the float levels were off. It took it a while longer to show up this time. he had it do it on him when he rode after it got back to him. It was running great before it started leaking fuel out the airbox.
 
Just an update on my issue. Got my bike back this past weekend after having the #1&2 float needles and seats replaced. She is running better then she ever has. Put a few miles on her the last couple of days and no more leaking. Now its just on to replace the annoy factory bars...

Thanks for all your guys help.
 
You must log in or register to reply here.
Back
Top