• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Chain excessively loose due to raised rear.

  • Thread starter Thread starter Boogieman
  • Start date Start date
B

Boogieman

Guest
Hi,
i have an 1100 Katana and the previous owner retrofitted it with '88 Kawasaki ZX10 running gear.
This involved removing the mono shock link and welding on some shock mount blocks. They had the presence of mind to add the ability to change the ride height by having more than one hole on the bottom mount.
I've found through experimenting that it handles better when it's raised at the rear slightly above standard but, then the chain is quite loose.
Im looking for ideas on how to limit how much slack there is (tensioner??). It's currently in pieces so if I had to, I could get the swing arm pivot moved but that's a last resort.
Any thoughts?

cheers
 
Think about it for just a moment. :-k

You have just proven the fact that the chain gets looser as you raise the back of the bike (by changing the angle of the swingarm).

If you adjust the chain for that new angle, what do you think will happen when you get on the bike and straighten out that angle?

Yep, the chain is going to get TIGHTER. Good chance it will be TOO tight.

Ideally, you want to adjust the chain for the worst-possible situation, which is when the center of the front sprocket, the swingarm pivot and the rear axle are in a straight line. That is when the chain will be the tightest. Any movement of the axle, either UP or DOWN, will add some slack to the chain. Adjust the chain for proper tightness for that worst-possible situation, then don't worry about it.

.
 
Have some one sit on the bike,or you sit on it,and check your chain slack then.
 
Steve said:
Think about it for just a moment. :-k

You have just proven the fact that the chain gets looser as you raise the back of the bike (by changing the angle of the swingarm).

If you adjust the chain for that new angle, what do you think will happen when you get on the bike and straighten out that angle?

Yep, the chain is going to get TIGHTER. Good chance it will be TOO tight.

Ideally, you want to adjust the chain for the worst-possible situation, which is when the center of the front sprocket, the swingarm pivot and the rear axle are in a straight line. That is when the chain will be the tightest. Any movement of the axle, either UP or DOWN, will add some slack to the chain. Adjust the chain for proper tightness for that worst-possible situation, then don't worry about it.

.
Click to expand...

Plus 1 on that! Adjust the chain tension at the point when the chain will be at its tightest, which is when the swing arm is straight.
 
Yeah, that's exactly what I do. Between me and a mate, we are 280kg, we sit on it until the two sprockets and the swing arm pivot line up then adjust to the tightest spot on the chain.
I've been running around a for a year on that theory with no hassles. I just thought I'd see if there's a more refined way of doing it or if there's any danger of the chain being that loose.

Thanks for for the replies.
 
Last edited:
You must log in or register to reply here.
Back
Top