Craigslist "funnies"

[Steel Toed Tank]

I would ride that!
Always wanted a hondkawazuki three wheeler with a street bike engine and trans in it.

I've owned an ATC 250R and they are already stupid fast, I dunno if I'd throw a four cylinder four stroke in one though.
I have seen a ATC with a CR500R motor in it with a VERY extended swing arm set up for sand dunes but the owner told me it was pretty much unrideable in anything but sand due to the wheelie factor.
I can't tell what the frame is, maybe an early air cooled 250R.
He should have left it in stock form, would have been worth more.
The 250R was 2 stroke and came with 38hp, the GS550 made almost 50.

I have gone thousands of miles on three wheelers, but I would never head down a paved 1/4 mile on THAT one at WOT, lol.

Interesting enough I guess.

 

[Spyder]

I have to admit, I want it. But I'm not quite as sane as your average crazy person...
I could have some fun on that thing....

 

[Don-lo]

It's a clean bike, but I have no idea how he came up with this price.

It's the 700, and not really rare at all.

http://muncie.craigslist.org/mcy/3467653853.html

Liquid cooled, shaft drivin, 13,800 mi. Extra fairing, extra tall backrest, battery maintainer. Original owners manual. 3rd owner really fast, 5500.00 or trade for 95 or newer jeep wrangler. 7652837662

 

[Guest]

Needs a little work?!

http://monroe.craigslist.org/mcy/3464863773.html

 

[Guest]

Looks like the Coyotes have been nipping!

Needs a little work?!

http://monroe.craigslist.org/mcy/3464863773.html

 

[tkent02]

Needs a little work?!

http://monroe.craigslist.org/mcy/3464863773.html

Yeah, that'll buff right out.

 

[Big T]

I feel sorry for his wife, this guy has no sense of what something is worth

Excitedly having a baby boy, my wife says all toys must go.

http://portland.craigslist.org/wsc/mcy/3492317421.html

 

[gearhead13]

I guess when you go to buy front brake pads, you just screw them to the bottom of your boots

 

[koolaid_kid]

I feel sorry for his wife, this guy has no sense of what something is worth

Excitedly having a baby boy, my wife says all toys must go.

http://portland.craigslist.org/wsc/mcy/3492317421.html

LOL. On the plus side, it does appear to have a Bonneville engine, including the Amal carbs.

 

[earlfor]

I feel sorry for his wife, this guy has no sense of what something is worth

Excitedly having a baby boy, my wife says all toys must go.

http://portland.craigslist.org/wsc/mcy/3492317421.html

He would have been a lot better off to have kept his $24.000 in the first place. He isn't going to get remotely close to that as it sits.

 

[koolaid_kid]

No one is going to give him 10 grand for any bike that doesn't even run at this point. As months pass buy, he'll get the picture.

It's called a parts bike. The only way he is going to get anything out of it is to either finish it or return it to stock. What a shame, and a waste of a classic bike.

 

[Guest]

Exactly, that bonny in it's classic dress would have been more desirable, especially when it comes to resale, another example of how much somebody sunk into a project not realizing $$ put into a bike just don't equate to value when it comes to re-selling, who knows, maybe there's 24k in there somewhere, I don't see it.
Finished he might get a decent dollar, but I don't see him getting his asking price though.

People just don't get it. You customize a classic/collectable bike, it loses value, period. There's no way around it. You simply can't fix stupid.

 

[duaneage]

If he really paid 1000 dollars just to paint the tank, he's not very good at picking winners. The extensive modifications, including grafting a different front end on, completely destroyed any interest Triumph lovers would have for the bike.

But hey, he spent every single day, all day, for 2 years pouring 24K into a half finished project bike that looks like a project bike. Sucks to be him.

 

[cowboyup3371]

I feel sorry for his wife, this guy has no sense of what something is worth

Excitedly having a baby boy, my wife says all toys must go.

http://portland.craigslist.org/wsc/mcy/3492317421.html

$10K for that and he couldn't finish the seat?

 

[Mista M]

http://lansing.craigslist.org/mcy/3411716270.html

1983 Suzuki GS 750 (on its way to be Cafe Racer) - $850 (Charlotte)

Date: 2012-11-15, 12:51PM EST

1983 Suzuki GS 750. has 3X,XXX miles. Ready to be turned into a Cafe Racer.

First year of these motorcycles to have mono rear shock. Great winter project! Bike runs but needs some love, I just dont want a Suzuki anymore. Needs carb work. It takes a while for it to warm up. Needs oil pan gasket(I made one out of cork gasket material but didn't cut it correctly, I know what needs to be done) I cut 6" out of the rear sub frame and welded it back together. I shortened the seat up and had it refrabriced. It has Clubman cafe racer style handle bars. I have everything to put it back to stock (Headlight, headlight plastic, stock handlebars, cluster, and other odds and ends) except for the 6" of frame and stock seat. Has slip on Supertrapp muffler. Will trade for another project or money. I can take more pictures if need be. I NEED TO GET RID OF THIS. I need a little bit bigger bike. Call or email with questions 5one7-2four3-6862

Why did it have to be a 750 . Hope the next owner can make something cool out of it

 

[kawfeedave]

Here's one from Akron -

http://akroncanton.craigslist.org/mcy/3494136331.html


1983 HarleyDavidson - $10000 (akron)

Date: 2012-12-21, 3:57PM EST
Reply to this postReply to: vpj2j-3494136331@sale.craigslist.org[?]

LOCAL SALE
NO TEXTING
NO PAYPAL
STRAIGHT UP CASH....
YOU WANT IT CALL ME IF YOUR GOING TO BUY IT...
ITS ALL NEW EVERY PEICE OF THIS BIKE HAS BEEN RESTORED, OR NEW
HAS NOT BEEN RODE YET BUT AROUND THE BLOCK..
POWERFUL SHOUVEL HEAD
AFTER MARKET ALUMIMUM DUEL PLUG HEADS
I GOT 17K INVESTED IN PAINT AN MOTOR.. 10900 IS A GREAT DEAL FOR THIS BIKE....
VERY RARE 1983 SHOUVEL HEAD
5 SPEED TRANNY
STD DUEL PLUG HEADS
NEW TOP END
CV CARB
K&N FILTER CLEAR OHIO TITLE
FRESH MOTOR ( NOT BROKE IN )
BUILT BY CRAIG IN PORTAGE LAKES
330-431-0686
may trade for 4x4 with plow.. must be nice.. no junk
I HATE TO SELL IT BUT MY FAMILY COMES FIRST..
THEN TOYS....

• Location: akron

$17K in paint and motor alone? Seeing as he claims to have both aftermarket and stock heads on the bike, I guess it's not cheap to put four heads on a twin cylinder bike.

"I HATE TO SELL IT BUT MY FAMILY COMES FIRST..
THEN TOYS.... " Much further down the list are spelling, grammer, and common sense.

 

[Steel Toed Tank]

I could see that shovel selling for 10k. That engine work he did ain't cheap, and when you take harley parts in for chrome or paint the shops all seem to charge more than they would charge to paint or chrome suzuki parts, lol

 

[Steel Toed Tank]

Nice quad by the way! If you get it done I wanna come take it for a spin.

 

[duaneage]

Here's one from Akron -

http://akroncanton.craigslist.org/mcy/3494136331.html

I like the ads where the seller takes a tough guy stand with buyers who he needs money from. I feel so good when someone talks down to me that way when they are gracious enough to let me buy something from them.

I feel like sending this guy an email with a spelling and grammar corrected version of his ad and a bill for 100 dollars for services rendered.

 

[duaneage]

You should list this on CL for 10000 dollars as a awesome project with 25 K invested and a sacrifice at that price.