Craigslist "funnies"

[Dave8338]

WHY would you do that? ? ? ? ??

OHHHH...it HURTS to look ! ! ! !

 

[ikantbreave]

Wonder if this guy has a brother thats into Suzuki's. LOL

phoenix craigslist > west valley > for sale / wanted > motorcycles/scooters - by owner please flag with care: [?]

miscategorized
prohibited
spam/overpost
best of craigslist


Avoid scams and fraud by dealing locally! Beware any deal involving Western Union, Moneygram, wire transfer, cashier check, money order, shipping, escrow, or any promise of transaction protection/certification/guarantee. More info
Vintage NOS 1960 1970 1980 Honda motorcycle parts (Deer Valley)

Date: 2011-08-24, 1:02AM MST
Reply to: sale-9xq9g-2519047134@craigslist.org [Errors when replying to ads?]
I have a half trailer full of vintage Honda motorcycle parts that I'm selling/trading. I have them arranged by Honda Model Code number (the middle part number) to make it easier to search for specific parts. Please read the whole email before contacting me. Most of the parts I have are supporting parts such as special bolts, clips, pins, gears, grommets, tranny parts, seals, top bridges, early 1960's tail light brackets, fork ears, tachometers, speedometers, adjusters, internal engine parts, some cables (mostly ATV, CR), some early switches / dimmers, a few early c200 c105 S65 cb77 cl77 cl160 pistons / rings, intake and cylinder base gaskets, axle nuts, Hundreds of drive chain links of diffferent sizes. etc, etc. I have some later model Honda small parts for Goldwings, Magna's, early crotch rockets and others. No part is to insignificant to ask me about, I may have it except those below.

Please do not ask for the following parts as I do not have them. Side Covers, Handlebars, Carbs, Fenders, Headlights, Wiring Harness, Rims, Cylinders, Cases, Heads, Mufflers (I have 6 early unidentifiable Honda mufflers and possibly one Kawasaki, Yamaha, or Suzuki, possibly for a Bearcat), Forks tubes, tires, tanks (do have a couple special order early 70's tanks/sidecover sets for the CL350 ), seats, sprockets, brake hubs, although I have several early brake panels, I don't have any generic Honda nuts/bolts. I have a lot of special bolts used on the bikes for special purposes. Many are discontinued and tough to find.

Please email me with the specific part number you need and its description. You can find the part number by searching the internet through most powersports store websites or looking up the manual online. I will get back to you. I cannot answer emails that ask "Do you have any CT70 parts?" Each model bike used parts that were first used on previous models so they will have another model code for that part. This will make it easier on both of us. I may also trade parts if you collect as well as I'm always looking for 72 XL250 parts and Early CR250 parts. Thanks for you time guys.

Bikes I have parts for .... Honda CR CL CB XL SL CA CB350 CB360 CB450 CL350 CL450 CB77 CL77 C105 C100 C102 CA77 CA95 CB160 CL160 S65 SL90 S90 CB750 GL1100 GL1200 GL1500 CT200 C200 XL125 XL250 XL350 SL70 XL70 SL350 CB125 CB175 CL175 ETC. ETC.

• Location: Deer Valley
• it's NOT ok to contact this poster with services or other commercial interests

PostingID: 2519047134

 

[ikantbreave]

Not raggin on the workmanship because I can't see it in that crappy picture but WOW, that's alot of money for a 450. Or did I miss the gold plating part?


phoenix craigslist > east valley > for sale / wanted > motorcycles/scooters - by owner please flag with care: [?]

miscategorized
prohibited
spam/overpost
best of craigslist


Avoid scams and fraud by dealing locally! Beware any deal involving Western Union, Moneygram, wire transfer, cashier check, money order, shipping, escrow, or any promise of transaction protection/certification/guarantee. More info
Suzuki gs450 bobber - $2500 (south scottsdale)

Date: 2011-08-22, 10:14PM MST
Reply to: sale-qruvv-2542649202@craigslist.org [Errors when replying to ads?]
I am selling my 81 gs450 bobber. It is hardtailed, just rewired, brand new battery, just repainted harley vivid black with 6 layers of clear, new upholstered real leather solo seat with steel pan, window bars, carbs were just cleaned and runs great. Bike comes with bill of sale only but will go throughs the steps to get the title for you. I am asking 2500 obo and am also accepting trades. would really like a sportster or ironhead. will also look at older vw bugs or cool lil rat rods. please do not waste my time or yours and dont want any tire kickers, dont check email often so you can reach me at 602 796 3186 my name is chase
Update. i will have the title and ready in hand tomorrow so my price is going up as well as i just painted the tank and fender with a clear coat with a prismatic pearl in it the thing looks amazing now. and agian i have had to many tire kickers and flakes if you dont have the cash dont bother calling. youre wasting my time and yours.



bobber,chopper,custom,ratbike

• Location: south scottsdale
• it's NOT ok to contact this poster with services or other commercial interests

PostingID: 2542649202

• Copyright ? 2011 craigslist, inc.
• terms of use
• privacy policy

 

[Guest]

Darnit. For some reason when I click on the link it just takes me to the Phoenix for sale home page. Damn shame `cause I wanted to ask the guy if he had a pair of mufflers for a 1969 CL90....

Wonder if this guy has a brother thats into Suzuki's. LOL

phoenix craigslist > west valley > for sale / wanted > motorcycles/scooters - by owner please flag with care: [?]

miscategorized
prohibited
spam/overpost
best of craigslist


Avoid scams and fraud by dealing locally! Beware any deal involving Western Union, Moneygram, wire transfer, cashier check, money order, shipping, escrow, or any promise of transaction protection/certification/guarantee. More info
Vintage NOS 1960 1970 1980 Honda motorcycle parts (Deer Valley)

Date: 2011-08-24, 1:02AM MST
Reply to: sale-9xq9g-2519047134@craigslist.org [Errors when replying to ads?]
I have a half trailer full of vintage Honda motorcycle parts that I'm selling/trading. I have them arranged by Honda Model Code number (the middle part number) to make it easier to search for specific parts. Please read the whole email before contacting me. Most of the parts I have are supporting parts such as special bolts, clips, pins, gears, grommets, tranny parts, seals, top bridges, early 1960's tail light brackets, fork ears, tachometers, speedometers, adjusters, internal engine parts, some cables (mostly ATV, CR), some early switches / dimmers, a few early c200 c105 S65 cb77 cl77 cl160 pistons / rings, intake and cylinder base gaskets, axle nuts, Hundreds of drive chain links of diffferent sizes. etc, etc. I have some later model Honda small parts for Goldwings, Magna's, early crotch rockets and others. No part is to insignificant to ask me about, I may have it except those below.

Please do not ask for the following parts as I do not have them. Side Covers, Handlebars, Carbs, Fenders, Headlights, Wiring Harness, Rims, Cylinders, Cases, Heads, Mufflers (I have 6 early unidentifiable Honda mufflers and possibly one Kawasaki, Yamaha, or Suzuki, possibly for a Bearcat), Forks tubes, tires, tanks (do have a couple special order early 70's tanks/sidecover sets for the CL350 ), seats, sprockets, brake hubs, although I have several early brake panels, I don't have any generic Honda nuts/bolts. I have a lot of special bolts used on the bikes for special purposes. Many are discontinued and tough to find.

Please email me with the specific part number you need and its description. You can find the part number by searching the internet through most powersports store websites or looking up the manual online. I will get back to you. I cannot answer emails that ask "Do you have any CT70 parts?" Each model bike used parts that were first used on previous models so they will have another model code for that part. This will make it easier on both of us. I may also trade parts if you collect as well as I'm always looking for 72 XL250 parts and Early CR250 parts. Thanks for you time guys.

Bikes I have parts for .... Honda CR CL CB XL SL CA CB350 CB360 CB450 CL350 CL450 CB77 CL77 C105 C100 C102 CA77 CA95 CB160 CL160 S65 SL90 S90 CB750 GL1100 GL1200 GL1500 CT200 C200 XL125 XL250 XL350 SL70 XL70 SL350 CB125 CB175 CL175 ETC. ETC.

• Location: Deer Valley
• it's NOT ok to contact this poster with services or other commercial interests

PostingID: 2519047134

 

[fishfarm]

Darnit. For some reason when I click on the link it just takes me to the Phoenix for sale home page. Damn shame `cause I wanted to ask the guy if he had a pair of mufflers for a 1969 CL90....

Here's the link to the original ad:

http://phoenix.craigslist.org/wvl/mcy/2519047134.html

 

[Guest]

Thanks fishfarm. That workss.

Here's the link to the original ad:

http://phoenix.craigslist.org/wvl/mcy/2519047134.html

 

[glenlloyd]

it's sad when a monkey gets a hold of a sawzall and a welder:

http://cgi.ebay.com/ebaymotors/Suzu...motorcycles&hash=item27bd8f2f13#ht_500wt_1012

That's just plain awful

 

[MK3Brent]

That's just plain awful

The tank looks funny being up the high.
But the rest looks fine.

 

[850GT_Rider]

Trike with Corvair Engine - Madison WI

Trike with Corvair Engine - Madison WI

Date: 2011-08-26, 3:12PM CDT
Where do I begin? Rat's-Nest wiring job? Tiller steering?? Gas tank hanging right behind your back???


http://madison.craigslist.org/mcy/2567574302.html

Reply to: sale-ppjq9-2567574302@craigslist.org [Errors when replying to ads?]



1964 Corvair engine on a unique stand.. This is a fast custom ride that needs very little tweeking.( 5pt harness is a good suggestion and a highback seat) You can call the owner for all specs from 9pm to midnight at 608-587-2659. During the day call 608-566-4712 from noon until 9pm.

• Location: Endeavor
• it's NOT ok to contact this poster with services or other commercial interests

PostingID: 2567574302

 

[davidduarte]

Date: 2011-08-26, 3:12PM CDT
Where do I begin? Rat's-Nest wiring job? Tiller steering?? Gas tank hanging right behind your back???


http://madison.craigslist.org/mcy/2567574302.html

where's the mower deck?

 

[bleed gasoline]

here is one that is a testament to Kentucky literacy. Doesn't bother with what type of bike, year of the bike, punctuation or any of those pesky details

http://louisville.craigslist.org/mcy/2569713767.html

Suzuki - $700 (Shepville )

Date: 2011-08-28, 12:51AM EDT
Reply to: sale-yepcz-2569713767@craigslist.org [Errors when replying to ads?]
I have been building this bike have alot of money in it need money for some tickets I have got that is the only reason I have it on here I love this bike I have a lot of time in it call for more info I am up for a trade to but it has to b a good one

• Location: Shepville

 

[laserred97gt]

http://chicago.craigslist.org/nwc/mcy/2571145030.html

 

[davidduarte]

This is a cool looking bike, if only it ran:

http://cgi.ebay.com/ebaymotors/1975-Yamaha-RD200-Cafe-Racer-Street-Trac

 

[cowboyup3371]

This is a cool looking bike, if only it ran:

http://cgi.ebay.com/ebaymotors/1975-Yamaha-RD200-Cafe-Racer-Street-Trac

Already deleted or sold.

 

[davidduarte]

Already deleted or sold.

it's been relisted:

http://cgi.ebay.com/ebaymotors/1975-Yamaha-RD200-Cafe-Racer

 

[SVSooke]

Deleted there to:-s

 

[davidduarte]

Deleted there to:-s

try searching this on ebay: Yamaha : RD200B (#320750864479)

 

[davidduarte]

here's the text of the ad:

Hello,
I have a completely rebuilt 1975 Yamaha RD200 2 stroke cafe/flat track style motorcycle with PA title. It has been stripped to the frame and powder coated, brand new Bridgestone spitfire tires and tubes, piggy back air shocks from REY, carbs rebuilt, UNI air filters, new fuel lines, fuel filters, oil lines and battery. Many NOS parts and hardware such as a new headlight, battery strap, petcock hardware, fork dust boots, chain adjusters etc. All the vintage bearings, steering steam, front and rear wheel have been replaced with sealed units. The tank has a small dent on right side front corner, new fiberglass seat with pad, original oil tank and side cover are flat black and ready for paint or left as is for the rat style look. Clubman style bars, bar end mirror and perches, levers and grips all new. Speedo, tach and turn signals have all been removed. I have a used voltage regulator from e-bay being delivered in the next few days. I'm also waiting for one last order from bikebandit, misc hardware new main harness fuse holder etc. A few things still need to be done before she is ready for the road. The voltage regulator and fuse holder will need to be installed and wiring finished, rear brake hardware and brake switch spring, chain and chain adjuster, stock exhaust expansion chambers installed. I have all new synthetic fluids from Motual gearbox oil, chain lube, fork oil, 2 stroke oil etc. The bike will need a shake down ride and all bolts retightened. A service manual and many parts will come with. I have well over $3200.00 dollars into this bike I just lost interest. I will not ship and bike is for sale locally so I reserve the right to end this auction at anytime. This bike has not run in approx 2 years. However engine turns over and I have no doubt if you have a little knowledge of motorcycles you will have it up and ding-dinging in a day. Please feel free to contact me with any questions or offers reserve price is $2000.00. Thanks for looking and happy bidding I just hope this sweet little 2 stroke will go to a good home.

 

[davidduarte]

 

[Gonzo]

I like the bike. I bet she sounds like a mean little b****! The price seems a bit much to me, but at least he realizes it's a loss and isn't one of them fools asking for the $8 squillion he spent working on it.