bob808
Forum Apprentice
I have been rebuilding a GS750 78, ( USA import) here in Scotland, for a few years, most recently, a head skim, valve timing, ignition timing.
Carbs have been, apart, a few times, cleaned, a few times, on and off, a few times, jets swapped , a few times, etc.
Latest issue was, not firing on 1 without choke.
I found an air leak, and haven't tried it again since ( to scared).
What I wanted to ask today is, HOW IMPORTANT IS IT TO HAVE ALL THE VACUUM HOSES AND PETCOCK HOSE ( running off a axillary tank at the moment) PLUGGED IN? To the running of the bike.
I have been reading loads on carbs, ( first build) and have seem very little on vacuums in that time.
Carbs have been, apart, a few times, cleaned, a few times, on and off, a few times, jets swapped , a few times, etc.
Latest issue was, not firing on 1 without choke.
I found an air leak, and haven't tried it again since ( to scared).
What I wanted to ask today is, HOW IMPORTANT IS IT TO HAVE ALL THE VACUUM HOSES AND PETCOCK HOSE ( running off a axillary tank at the moment) PLUGGED IN? To the running of the bike.
I have been reading loads on carbs, ( first build) and have seem very little on vacuums in that time.