A
Anonymous
Guest
Took the bike for a dyno run this morning, and after hooking everything up, it showed that it was running very lean at low rpm's / idle, but once it was on full throttle it seemed to be running better... Off the dyno runs, I have a very flat tq curve starting at about 3k RPM about 15tq and 26 HP. TQ goes to its first peak at 5200RPM at 35TQ takes a little dipof about 1 or 2 TQ stays there for 500RPMs, then goes back up to 40.7 TQ at 6800 then stays at 40.7 until 9400RPM's then drops back down a bit...
Horsepowerstarts at the 26HP at 3k, goes up to 36HP at 4k, stays flat until 5500 and at 6k shoots up very evenly to 70.4HP(MAX) at 9k and stays flat until 11k. Has anyone else done a dyno on their bike? How does mine sound? As far as I know, everything is stock.
Horsepowerstarts at the 26HP at 3k, goes up to 36HP at 4k, stays flat until 5500 and at 6k shoots up very evenly to 70.4HP(MAX) at 9k and stays flat until 11k. Has anyone else done a dyno on their bike? How does mine sound? As far as I know, everything is stock.