B
bwanna
Guest
I have an '82 GS 450 T and the rubber inside the gas cap that seals agains the gas tank is a bit worn. Instead of spending all sorts of money on trying to replace it, I cut a donut size (of the approrpiate dimensions) piece out of an unused windshield suction cup. This is the kind used to hold the GPS, Phones, etc.
I place it between the rubber and flat metal support ring. This gave just enough additional pressure so now when I pop the cap on the tank it seals very well.
Just passing it along!
I place it between the rubber and flat metal support ring. This gave just enough additional pressure so now when I pop the cap on the tank it seals very well.
Just passing it along!