• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Fuse box replacement

  • Thread starter Thread starter ShadowFocus603
  • Start date Start date
S

ShadowFocus603

Guest
So earlier this week I purchased one of these fuse boxes:
http://www.amazon.com/Support-Truck...&redirect=true&ref_=oh_aui_detailpage_o01_s00
Just got it in today and went ahead and wired it up:
fYgpD1I.jpg

Overall I am very happy with it. It's nice to have fresh, clean contacts and the peace of mind that goes with it. Also, modern blade style fuses are great. I actually tried to find a box that took the smaller blade fuses but it turned out to be a non-issue. As you can see, even with additional options for circuits, the new box is almost spot on for size for the old one. In the photo, I built the jumper wire to connect all 6 connections on the left side just in case. Now that I have test run the bike with the box in place I will remove the bottom two positions to free up space to run 2 fused accessories (I have a 12 volt power socket/usb port ready to go). Just thought I'd share.
 
I get the feeling you have a lot of wire running to the ignition switch that is unfused. How about the r/r is that included in the unfused list?
 
The ignition feed is fused. It has an inline 15a right now. The regulator is tied into the red to ignition/battery as per your "T" method.
 
Hmm Pos after reading what you said I was curious as to why so I got to looking at the wiring diagram. I see what you meant about it being unfused if not for the inline that is installed. I'll probably go back out later tonight when I get some more time and wire it per the diagram with the red feed to the ignition going to 15a up top then to the ignition. Then I'll take the orange from the ignition and move it over to the inlet side of the box. Thanks for calling it to my attention.
 
ShadowFocus603 said:
Hmm Pos after reading what you said I was curious as to why so I got to looking at the wiring diagram. I see what you meant about it being unfused if not for the inline that is installed. I'll probably go back out later tonight when I get some more time and wire it per the diagram with the red feed to the ignition going to 15a up top then to the ignition. Then I'll take the orange from the ignition and move it over to the inlet side of the box. Thanks for calling it to my attention.
Click to expand...

And the output of the 15A fuse ties to the R/R(+) before going to the ignition switch on RED (returning with ORANGE).
 
Okay let's try this again.
k7F3DXn.jpg

Wired properly now. Battery to 15a fuse to ignition (joining with regulator) back to fuse box on orange feeding out to lights, signals, and ignition.
 
I had been contemplating the Eastern Beaver PC-8 but they are $55 which I get the idea you get what you pay for but yikes. This box is $9 and should serve me well for awhile at least.
 
You must log in or register to reply here.

Similar threads

R
out with jumper cables, in with jump boxes
Replies
4
Views
73
argonsagas
argonsagas
crazyramen
Ground Loops, Mystery Fuse, and Bad Crimpers
Replies
3
Views
80
crazyramen
crazyramen
jimhickcox
what fails next, after the fuse?
Replies
8
Views
101
jimhickcox
jimhickcox
S
SH775 wire harness guidance
Replies
5
Views
168
bren
bren
P
GS1100G charging issue (yes another one)
Replies
4
Views
107
Who Dat?
W
Back
Top