D
Dizzixx
Guest
I would guess that since the forks installed into the triples with no problem then your left fork is bent. As far as you gauge goes, you could fabricate a bracket to change the angle.
Well I will have to pull the forks and take them into work and see if they really are bent. Regardless as it turns out, Dan aka "Salty Monk" was able to confirm that in fact the conversion is not currently compatible with the leading axle forks (so I totally ground off the steering stops for nothing!)
So I am in the market for a set of inline axle forks both with caliper mounting locations. If anyone has a set of these for a 750 they are looking to sell please let me know. I would also be willing to trade as I will now have two other sets of forks I will need to get rid of, the original set of inline axle forks for a single caliper setup (maybe for someone doing a smaller bike modification?) and also now these leading axle forks which have a brand new set of seals and have been thorough cleaned out inside...
I have posted in the WTB section: http://www.thegsresources.com/_foru...GS-750-inline-axle-forks-for-dual-brake-setup
Last edited: