• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

GS1000G - BS34SS Carbs - Pilot Screw Setting

  • Thread starter Thread starter DonL
  • Start date Start date
D

DonL

Guest
Hi all,

Been searching for the setting of the Pilot screws on 1980 GS1000G,
BS34SS CV Carbs.

I read the Carb cleaning procedures and performed it on my carbs.
Upon taking out the pilot air screws,
#1 was out 1/4 turn
#2 was out 1-1/2 turns
#3 wa out 3/4 turn
#4 was out 1 turn.

Hmm...doesn't sound right and it ran junky anyways.
So, searching the archives, I came up with:
The 'pilot screw' is 'factory preset' according to the manual, but ours were about 1-5/8 turns out (CCW) from fully seated...fully seated being just gently bottomed out. This is actually a gas/air mix which is controlled
by this screw, affecting the idle/slow system. Experience shows that screwing it in (CW) leans out the mix, and conversely, screwing it out (CCW) richens the mix.
Someone else mentioned that they started with theirs 2 turns out and adjusted from there.
The service manual says to set them at 3.5 turns

My delima is, ttart at 3.5 turns out, or 2 turns out?
Should they be about 1-5/8 turns out when adjusted properly?

I take it when I'm adjusting them that I'm looking for the best idle speed
without adjusting the throttle plates (eg. base idle with the knob)
 
3.5 turns out seems a bit too much...i would start at 1.5-2 then take a ride for a while (more that just a few miles) after the ride you can check the spark plug condition to see if you are running rich or lean (black sooty plugs- rich, extreme white-lean, gray or rusty brown-correct)
 
Did it work? Mine runs rich too, I changed out the head gasket and the faces of the intake/exhaust valves were carboned up and flaky, so I need to reset my screws.
 
have to remember guys...any carb setting info is just a starting point..there are many variables that affect fuel burning...if you think that you have the carbs really close and you are still getting the same results you might want to start looking at the ignition (coils, plug wires, etc.)
 
Hmmm...somebody edited this thread and took many posts out.
I finally got the carbs rebuilt.

Started with the pilot air screws two turns out, but it would not rev up.
I riched each one 1/4 turn to 2 1/4 out, and it seems to be doing ok.
I just got the oil cooler on and the new tires, so test ride is this friday.
I'll keep you all up to date.
 
DonL said:
Hmmm...somebody edited this thread and took many posts out.
Click to expand...

Actually, the problem is that you posted the same thread two times. Most of the responses are in your other thread.

.
 
From what I remember, mine our out about 3 turns, anything further in, it wont run properly, I also have a K/N in the air filter box, I think I might try 4 turns out to lean it out.
 
Nessism said:
Actually, the problem is that you posted the same thread two times. Most of the responses are in your other thread.

.
Click to expand...

Well...what can I say? Oopps! My bag!
Maybe we can get all the responses in one thread....who would I ask to do that? The admin?


Still wondering if when the screw is turned out, is that richer, or leaner?
 
yippee...finally the pilot screw info was found it in the archives

I'll get the hang of this yet.


Posted 23 Feb 2007 by tfb:

OK, I went through the manual systematically, and here are the settings for the various models it lists:

GS1000SN ('79) --- VM26SS-equipped models --- Air screw 1.0, Pilot 5/8
GS1000SN ('79) --- VM28SS-equipped models --- Air screw 1 1/4, Pilot 3/4

GS1000L ('79) --- VM26SS-equipped models --- Air screw 1.0, Pilot 5/8
GS1000L ('79) --- VM28SS-equipped models --- Air screw 1 1/4, Pilot 3/4

GS1000ET ('80) --- BS34SS (ie. CV carbs) --- Pilot 1 5/8

GS1000ST ('80) --- VM30SS (in Australia) --- Air screw 1 3/4, Pilot 5/8

GS1000GT/GLT ('80) --- BS34SS --- Pilot 1 5/8

GS1000GX/GLX ('81) --- BS34SS --- Pilot "PRESET" Ah yes, there you go, the dreaded "preset" word. But don't worry, in all other respects (jetting, float height, etc.) the carbie data for this model are the same as for the '80 GS1000GT/GLT (above), so setting the pilot at 1 5/8 will be the way to go.

*Naturally* these are just nominal settings, and assume that everything is stock-standard and that your engine is in good condition, clean air filter, etc. So that if you have pods, after-market exhaust system, bored-out engine and so on, you will need to fine-tune things to suit your setup.
__________________
"I see no hope for the future if we are dependent upon the youth of today" -- Hesiod, 1000BC.
Kat1100SZ -- aka 'The Flying Banana'
GS1000S -- aka 'The Magic Carpet'
http://www.members.optusnet.com.au/fischermk/index.htm
Last edited by tfb : 02-23-2007 at 07:38 PM.
 
Mine refuses to run properly if I screw them in more than 3 turns out, I turned them out to 4, so your actually saying screw them in leans it out, so why does mine run bad if I screw them in further??????????????????????????
 
Final outcome.

It seems my bike likes 1 3/4 turns out on all four of the pilot mixture screws.
Took it out on a 120 mile run today, and it did great. No loading up, no running lean.
After it cools I'll check plug color.

Thanks to all for the assitance!
Hopefully I can repay, and pay it forward.
 
You must log in or register to reply here.
Back
Top