• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

gs1100 cilinders on 1000 bloc

  • Thread starter Thread starter vitesse
  • Start date Start date
V

vitesse

Guest
Hello, there guys,


Do 1100 cilinders and pistons fit a standard gs 1000 bloc without modification?
:confused:
 
Well it worked for me - I bought a GS1000L motor (which had been bored to 1100 with MTC pistons) from a wreck and used the cylinder block and pistons on my GS1100GK bottom end. No problems at all fitting the parts together. The issues relating to lousy petrol and MTC high compression was another story...
(GS1000 / GS1100 means two valve motors where I come from)
 
differences between the 1100 "G" and the 1000 engine are more than just bore size Suzuki chose for some odd reason to bore and stroke the 1000 out to 1100cc.
70mmX64.8mm for the 1000 and 72mmX66mm for the 1100

now the cylinders should fit but I do not know if the wrist pin sizes are the same or if the distance to the crown of the wrist pin holes are the same.

if they are the same you will have a GS 1066!!

the big bore kits that take the 1000 out to 1100 are just big bore they reach 1100 by taking the bore out 3mm. factory is 2mm with a 1.2mm longer stroke.

the 16 valve 1100 (chain drive) has the same bore and stroke as the 8 valve (shaft drive) engine but the 16 valve pistons are "flat top" and the 8 valve uses "dome top" pistons so they are not compatible.
 
The 8 valve motors and the 16 valve motors have different stud locations.

Jay
 
You must log in or register to reply here.
Back
Top