• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

GS850G start-up, running and power issues.

  • Thread starter Thread starter ThorsGhost13
  • Start date Start date
So the shims came in and I have put them into the motor, I would like to give you all the readings (clearances) but it was cold enough to make the oil a bit... thick. I did try to take some and found that most of the mesurments are now close to what I was looking for. I am going to wait for the weather to warm up a bit (or get a heater pointed at the block) and take proper mesurments.

I've also looked at the rear wheel and found that it is not the brakes that are giving resistance to the rear wheel, but the final drive or the wheel bearing. As the bearing sounds and feels smooth I am thinking that there is supposed to be some resistance even when the bike is in nutral (I checked if it was in gear as well and it didn't move at all when I selected fist), but I honestly dont know if its supposed to have resistance or not. Any thoughts? Also it's on a center stand so it easy to check.

I've also bought a starter relay and will be putting that on soon, hopefully fixing the starter motor staying engaged (as per the clymer manual's suggestion, it was the relay or the start button). The list of things getting checked, replaced and fixed is getting longer but the list of things wrong with Rasputin is slowly getting shorter. Hopefully one day in 4 months I will have problem free run both to and from work!
 
On a shaft drive GS, there's always some resistance to rear wheel rotation in neutral -- it's won't spin at all if you give the rear wheel a kick or pull it by hand. As long as you can move it fairly easily by hand, it's fine.
 
Well thats good to hear about the resistance.

Today I changed out the starter relay, and mesured the clearances (and swapped a couple of the shims out) and now all the clearances are between 0.002 and 0.004... I think that is it... it seems like I have finished the list of things needed to get this thing running well. Now I just need to put em back together and all should be well, knowing my luck it won't be the end. It should be close though, but there is not much more that can make it run like crap.

Once Phred and I can get a free Saturday or Sunday in the next month or two I will have learned how to pull apart and put back together a carb as well.

The next time I post I will have the numbers for you all and hopefully good news on wether it runs well or not.
 
Last edited:
You must log in or register to reply here.

Similar threads

Q
Intermittent top end rattle....only when hot
Replies
6
Views
89
rphillips
R
T
GS850G won't go into gear from idle
Replies
5
Views
91
dandypop
dandypop
crazyramen
Low Compression in 3 Cylinders 100 Miles After Rebuild
Replies
16
Views
166
rphillips
R
F
Engine Knock
Replies
19
Views
182
DimitriT
DimitriT
cdahl383
GS300L starts and idles but bogs with throttle
Replies
17
Views
164
salty_monk
salty_monk
Back
Top